models nm200 • nc300
•Other Remote Stations cannot listen to the room.
•The room cannot receive music or
•The room cannot be monitored.
•The station does not hear the door chime and cannot talk and listen to the Door Station.
Monitor
When a station is set to Monitor:
•Any station set to Radio/INT can continually hear all sound and activity in the room.
•You can communicate with other remote stations.
•The room cannot hear the door chime.
•You can talk to the Door Station, but will not be able to listen to it.
•The room cannot receive music.
•Other rooms can talk to a monitored station, if the monitor override is set to On.
intercom operation
Talk
Talk allows users to talk to all stations with selector switches set to Intercom or Radio/INT, unless they have PRIVACY button pushed in.
To initiate a Talk/Listen session, press TALK and begin talking. You can hear remote users if you press the LISTEN button or if they press their TALK button.
Listen
Press LISTEN to listen to all stations set to Intercom or Radio/ INT. You cannot hear stations that have PRIVACY activated.
Door Talk/Listen
•Press TALK and LISTEN simultaneously to enter Door Talk mode. This allows you to talk to the Door Stations. All other stations set to Intercom or Radio/INT can hear the conversation, unless they have the PRIVACY button activated.
•Release the TALK and LISTEN buttons to listen to the Door Station. The Listen mode is active for a total of 25 seconds after you release the TALK and LISTEN buttons. You may talk again at any time by pressing TALK and LISTEN. Each time the buttons are released, you can listen for another 25 seconds.
•Door Talk mode is suspended at the end of the 25 second listening period or if you press either the TALK button or the LISTEN button individually.
Monitor
All stations set to Radio/INT on the Master Station can continually hear the sound and activity from a station set to Monitor.
Monitor Override
From the Master Station, you can temporarily override the Monitor so you can communicate with stations set to Monitor. When Monitor Override is off, stations set to Monitor cannot hear any intercom communication or the door chime. When Monitor Override is on, stations set to Monitor can hear only incoming talk from other remote stations.
Page
To turn Monitor Override on and off:
To change the setting, simultaneously press and release AUTO and POWER. The display shows either ON (Monitor Override - on) or OFF (Monitor Override - off).
Note: Exit the monitor override setting by pressing AUTO and POWER or waiting for the display to show the clock time again.
Privacy
When the PRIVACY button is activated at a station, the station cannot be listened to or monitored.
•The room can still communicate using the Talk feature.
•The room still receives music.
•The room will still hear the door chime.
Security/Home Automation (Optional)
This optional function can control another system that is properly connected to the NM200. For example: it may control a door release mechanism, turn on the lights, set off an alarm, etc. This function is available from the Master Station and all Remote Stations (NRS200). It is not available from an Outdoor Remote Station.
To initiate this feature from a remote station:
1.Simultaneously press VOLUME UP and VOLUME DOWN and hold for at least 4 seconds. After 4 seconds, this feature is active for as long as the buttons are pressed.
2.Release the buttons to deactivate the feature.
Master Station Operation
Radio Operation
1.Press POWER to turn on music.
2.Select either FM or AM as the music source. See Master Station Settings/Music Settings/Music Source for instructions.
3.Use TUNE UP or TUNE DOWN to select a station, or press PRESET to select a preset station.
Indoor/Outdoor Remote Station Operation
Remote Station Functions
•Door Talk/Listen
Press TALK and LISTEN simultaneously to talk to the Door
Stations. Release both buttons to listen.
•Listen
Listen to all stations set to Intercom or Radio/INT unless they have the PRIVACY button activated.