GE 25424, 25423 manual Delay Ring, Phone ID

Programming the Telephone

Delay Ring

Use this setting to delay the Central Office ring.

1.Press the Menu button while in standby mode.

2.Use the Vol (+ or -) buttons to scroll up or down to SET PHONE OPTIONS.

3.Press the Sel/Save button.

4.Use the Vol (+ or -) buttons to scroll up or down to SET DELAY RING.

5.Press the Sel/Save button.

6.Use the Vol (+ or -) buttons to scroll up or down to 0 ring up to 10 rings.

7.Press the Sel/Save button to save.

NOTE: The default Delay Ring is 0. If your system has a phone with the auto attendant ON, we suggest that you set the Delay Ring to 2 rings. This allows the auto attendant to pick up the incoming call before it rings in.

Phone ID

1.Press the Menu button while in standby mode.

2.Use the Vol (+ or -) buttons to scroll up or down to SET PHONE OPTIONS.

3.Press the Sel/Save button.

4.Use the Vol (+ or -) buttons to scroll up or down to SET PHONE ID.

5.Press the Sel/Save button.

6.Press the Sel/Save button again to automatically set the phone ID, or press any memory button (1-16) to assign a phone ID.

NOTE: The Intercom indicator will flash red and blue if the ID is not programmed.

NOTE: The Phone ID (01-16) is unique. If you manually select a phone ID that belongs to another unit on the system, NOT AVAILABLE shows in the display. Press Sel/Save or choose another memory button.

NOTE: If the phone cannot find an ID, determine if there are too many phones connected to the system. A maximum of 16 phones can be connected in the system at one time.

NOTE: You may press the Exit button at any time to exit , except during the ID search.

16