Aiphone FK1629 Setting the call transferring Transfer, Transfer Destina Transfer destination

Page 18

ESetting the call transferring [TRANSFER]

You can make the following settings for transferring calls.

Sub item

Description

Setting range

[CALL

Enables (ON) or disables (OFF)

ON

TRANSFER]

the call transferring.

OFF

[TRANSFER

(Available when [CALL

(Registering a

DESTINA]

TRANSFER] is set ON.)

master station or

(Transfer

Selects a master station in your

a remote site)

destination)

site or a remote site as the

 

 

transfer target.

 

[TRANSFER

(Available when [CALL

00-60 (sec.)

DELAY]

TRANSFER] is set ON and the

 

 

target is set at [TRANSFER

 

 

DESTINA].)

 

 

Sets the time of starting

 

 

transferring after a call is received.

 

[SCHEDULE

Enables or disables the call

ON

TRANSFER]

transferring to be performed

OFF

 

on the schedule preset by the

 

 

system settings automatically.

 

[SCHEDULE

(Available when [SCHEDULE

(Registering a

DESTINA]

TRANSFER] is set ON.)

master station or

(Schedule

Selects a master station in your

a remote site)

destination)

site or a remote site as the

 

 

transfer target on the schedule.

 

1 Press repeatedly to select [TRANSFER] (so that it is highlighted), and then press ZOOM/WIDE to select.

The sub items are displayed.

*The sub items can also be displayed by pressing TRANSFER in the standby mode.

NOTE:

The above display example differs from the actual one.

2 Press repeatedly to select the target sub item (so that it is highlighted), and then press ZOOM/WIDE to select.

3 Make the settings on each sub item as follows.

[CALL TRANSFER]:

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

[TRANSFER DESTINA] (Transfer destination):

*This setting is available only when [CALL TRANSFER] is ON.

Press repeatedly to select the target master station in your site or a remote site (so that it is highlighted), and then press ZOOM/WIDE .

*The LED on TRANSFER lights up (red) when [CALL TRANSFER] is set ON and the target is set at [TRANSFER DESTINA].

[TRANSFER DELAY]:

*This setting is available only when [CALL TRANSFER] is set ON and the target is set at [TRANSFER DESTINA].

Press repeatedly to set the delay time, and then press ZOOM/WIDE to select.

*If the delay time is set to “00”, a call will be transferred to the target directly.

[SCHEDULE TRANSFER]:

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

[SCHEDULE DESTINA] (Schedule destination):

*This setting is available only when [SCHEDULE TRANSFER] is ON.

Press to select the target master station in your site or a remote site (so that it is highlighted), and then press ZOOM/WIDE .

*Press SETTING as “BACK” function to return to the previous screen.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Network Direct System Contents Calling another station Direct voice call Monitoring Viewing video images at Target station PagingSending e-mails Precautions IntroductionAbout this manual General Precautions Part Names Control panelMonitor Display item examplesDisplay examples Displaying call and/or paging record and reception recordIP vandal-resistant video door station IS-IPDV surface-mount IP vandal-resistant video door station IS-IPDVF flush-mountOutline of Operations Communication Master stations Paging Door stations Target Operation Electric door strike Door station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Setting the display modes of the monitor Display Press to select the desired search item so thatSetting the call transferring Transfer Transfer Destina Transfer destinationSchedule Destina Schedule destination Setting the Privacy function Privacy Initializing the set contents InitializationReceiving a call Call tone rings, and the corresponding display appearsLights up When called in from a door station Communication in the hands-free modeCommunication in the press-to-talk mode Answer the call in one of the following waysPress-to-talk mode Communication by using the handsetHands-free mode About the priorityWide Zoom Switching Zoom/WidePan & Tilt Left Right DownTo restore the image before adjustment Adjusting imagesPress Adjust when the image is difficult to see Press Adjust againCommunication transferring Call transferringWhile receiving a call To communicate with the callerPlaced Calls →P Standby modeSearch items Name Search →PSystem in your site and to a network Search ListPaging Zone →P 002/002 Direct system in a remote siteSearching for a station, zone or remote site from the list Press to select the target station so that it is highlighted Select Stations by Type from the Search LIST. →PSelect Paging Zone from the Search LIST. →P Start paging by following the procedure for pagingFollowing the procedure for the corresponding Press to select the target zone so that it is highlightedPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PCalling another station direct voice call Press OFF or hang up the handset to finish communicatingTo shift to scan-monitoring MonitoringScan-monitoring To monitor only the desired station continuouslyViewing video images at the target station Or lifting the handsetOther Functions Technical Precautions Available Character ListSpecifications Color monitor IP master station IS-IPMVIP vandal-resistant video door station flush-mount IS-IPDVF Warranty FCC

FK1629 specifications

The Aiphone FK1629 is a cutting-edge intercom system designed for both residential and commercial applications, providing enhanced communication capabilities and security features. A key characteristic of the FK1629 is its modular design, which allows for easy customization and scalability based on user needs.

One of the main features of the Aiphone FK1629 is its two-way audio system, enabling clear and effective communication between the entrance station and the user. The intercom supports a wide frequency range, ensuring that voices are transmitted without distortion, even in noisy environments. Additionally, it is equipped with noise-cancelling technology, which further enhances audio clarity by filtering out background sounds.

The FK1629 also incorporates advanced video capabilities, featuring a high-resolution camera that ensures excellent image quality. This is particularly useful for security purposes, as users can visually identify visitors before granting access. The camera typically offers a wide-angle view, capturing a broader field of vision to enhance situational awareness.

Integration with mobile applications is another highlight of the FK1629. Users can connect the intercom system to their smartphones or tablets, allowing for remote monitoring and communication. This feature not only increases convenience but also improves security, as users can respond to visitors even when they are not at home.

In terms of installation and setup, the Aiphone FK1629 is designed to simplify the process, featuring clear instructions and versatile mounting options. This makes it an ideal choice for both DIY enthusiasts and professional installers. The device is also durable, built with high-quality materials that ensure longevity and reliability under various conditions.

Moreover, the Aiphone FK1629 adheres to the latest safety standards and regulations, providing peace of mind for users concerned about security. With features such as encrypted communication, this intercom system is designed to protect against unauthorized access and ensure the privacy of conversations.

In summary, the Aiphone FK1629 intercom system stands out for its combination of audio and video communication, ease of use, mobile integration, and robust security features. Ideal for both homeowners and businesses, it represents a reliable solution for modern communication and safety needs.
Top Page Image Contents