Aiphone FK1629 operation manual Monitoring, Scan-monitoring, To shift to scan-monitoring

Page 34

Monitoring

You can monitor a door station or multiple door stations in your site sequentially (scan-monitoring) with a master station.

When monitoring, you can view the image at the station and hear the sound.

■Monitoring

1 Search for and select the door station in your site that you want to monitor (so that it is highlighted) in one of the search methods. (→P. 27-32)

NOTE:

You cannot monitor a master station and remote site.

2 Press MONITOR (when "[] MONI" is displayed).

3 Press OFF to finish monitoring.

NOTES:

•If the selected station is being used (calling, communicating, being monitored, etc.), you cannot monitor the station.

•If you press TALK or lift the handset while monitoring, the communication mode starts with the station after a tone.

•During video monitoring, you can switch Zoom/Wide, make Pan & Tilt control and adjust images on the monitor. (→P. 23-24)

To shift to scan-monitoring

Press MONITOR during monitoring.

*If the station being monitored is a preset one for scan- monitoring, the scan-monitoring starts from the subsequent station in the scan-monitoring order.

*If the station being monitored is not a preset one for scan- monitoring, the scan-monitoring starts from the first station in the scan-monitoring order.

■Scan-monitoring

You can monitor the preset stations in your site (up to 20 door stations) sequentially, each for the set duration.

*The stations should be preset in the System setting on a PC.

1 Press MONITOR in the standby mode.

The stations set for scan-monitoring are monitored sequentially, each for the set duration.

*If the scan-monitoring lasts 10 minutes, the backlight of the master station monitor will be turned off.

Pressing any key will turn on the backlight again.

*If the scan-monitoring target station is only one, the scan- monitoring ends after a lapse of approx. 11 minutes.

2 Press OFF to stop scan-monitoring.

To monitor only the desired station continuously:

Press MONITOR when the target station is being monitored during scan-monitoring.

*Press MONITOR again to restart the scan-monitoring.

NOTES:

•Pressing TALK is invalid during scan-monitoring.

•If the handset is lifted during scan-monitoring, the scan-monitoring

is continued and sounds at the target station can be heard from the handset, and when the handset is hung up or OFF is pressed, the scan-monitoring ends.

•If the master station receives a call during scan-monitoring, the scan-monitoring ends automatically.

•If one of the preset stations is being used (calling, communicating, being monitored, etc.) during the scan-monitoring, it will be skipped.

•During the scan-monitoring, the Zoom/Wide, Pan & Tilt, door release and image adjusting functions are disabled. (The camera is fixed in the Wide mode.)

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Network Direct System Contents Viewing video images at Target station Paging Calling another station Direct voice call MonitoringSending e-mails Introduction PrecautionsAbout this manual General Precautions Part Names Control panelMonitor Display item examplesDisplay examples Displaying call and/or paging record and reception recordIP vandal-resistant video door station IS-IPDV surface-mount IP vandal-resistant video door station IS-IPDVF flush-mountOutline of Operations Communication Master stations Paging Door stations Target Operation Electric door strike Door station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLBasic setting procedure Initial settings Initial SettingSetting the call-in tones Door Call Tone Setting the display modes of the monitor Display Press to select the desired search item so thatTransfer Destina Transfer destination Setting the call transferring TransferSchedule Destina Schedule destination Setting the Privacy function Privacy Initializing the set contents InitializationCall tone rings, and the corresponding display appears Receiving a callLights up When called in from a door station Communication in the hands-free modeCommunication in the press-to-talk mode Answer the call in one of the following waysPress-to-talk mode Communication by using the handsetHands-free mode About the priorityWide Zoom Switching Zoom/WidePan & Tilt Left Right DownTo restore the image before adjustment Adjusting imagesPress Adjust when the image is difficult to see Press Adjust againCommunication transferring Call transferringWhile receiving a call To communicate with the callerPlaced Calls →P Standby modeSearch items Name Search →PSystem in your site and to a network Search ListPaging Zone →P 002/002 Direct system in a remote siteSearching for a station, zone or remote site from the list Press to select the target station so that it is highlighted Select Stations by Type from the Search LIST. →PSelect Paging Zone from the Search LIST. →P Start paging by following the procedure for pagingFollowing the procedure for the corresponding Press to select the target zone so that it is highlightedPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PCalling another station direct voice call Press OFF or hang up the handset to finish communicatingTo shift to scan-monitoring MonitoringScan-monitoring To monitor only the desired station continuouslyViewing video images at the target station Or lifting the handsetOther Functions Technical Precautions Available Character ListColor monitor IP master station IS-IPMV SpecificationsIP vandal-resistant video door station flush-mount IS-IPDVF Warranty FCC

FK1629 specifications

The Aiphone FK1629 is a cutting-edge intercom system designed for both residential and commercial applications, providing enhanced communication capabilities and security features. A key characteristic of the FK1629 is its modular design, which allows for easy customization and scalability based on user needs.

One of the main features of the Aiphone FK1629 is its two-way audio system, enabling clear and effective communication between the entrance station and the user. The intercom supports a wide frequency range, ensuring that voices are transmitted without distortion, even in noisy environments. Additionally, it is equipped with noise-cancelling technology, which further enhances audio clarity by filtering out background sounds.

The FK1629 also incorporates advanced video capabilities, featuring a high-resolution camera that ensures excellent image quality. This is particularly useful for security purposes, as users can visually identify visitors before granting access. The camera typically offers a wide-angle view, capturing a broader field of vision to enhance situational awareness.

Integration with mobile applications is another highlight of the FK1629. Users can connect the intercom system to their smartphones or tablets, allowing for remote monitoring and communication. This feature not only increases convenience but also improves security, as users can respond to visitors even when they are not at home.

In terms of installation and setup, the Aiphone FK1629 is designed to simplify the process, featuring clear instructions and versatile mounting options. This makes it an ideal choice for both DIY enthusiasts and professional installers. The device is also durable, built with high-quality materials that ensure longevity and reliability under various conditions.

Moreover, the Aiphone FK1629 adheres to the latest safety standards and regulations, providing peace of mind for users concerned about security. With features such as encrypted communication, this intercom system is designed to protect against unauthorized access and ensure the privacy of conversations.

In summary, the Aiphone FK1629 intercom system stands out for its combination of audio and video communication, ease of use, mobile integration, and robust security features. Ideal for both homeowners and businesses, it represents a reliable solution for modern communication and safety needs.
Top Page Image Contents