Aiphone FK1629 operation manual While receiving a call, To communicate with the caller

Page 26

Door release

You can release the door lock while being called from, communicating with, or monitoring a door station if a door release device is connected to the station.

Press while being called from, communicating with, or monitoring the door station.

The door lock is released for the time set in the System setting on a PC.

*If the set release time is “0”, it can be released while the button is pressed and held.

NOTES:

To enable door release to a door station in a remote site, the appropriate setting must be made at the remote site.

This function is disabled during scan-monitoring. ( P. 34)

Using the PRIVACY function

The PRIVACY function of a master station prevents you from being heard by other master stations (in your site) or remote sites that call you.

To activate the PRIVACY function

Set the PRIVACY MODE to “1” or “2” in the "INITIAL SETTING". If you will not use the PRIVACY MODE, set it to “OFF”. (→P. 19)

While receiving a call

When the PRIVACY function is activated

The microphone of your master station is muted, so the sounds at your side are not heard by the caller.

When the PRIVACY function is off

The microphone of your master station is enabled, so the sounds at your side are heard by the caller.

To communicate with the caller

When the PRIVACY function is activated

Press TALK or lift the handset, and the microphone is enabled. Then you can communicate with the caller.

When the PRIVACY function is off

You can communicate with the caller without pressing TALK or lifting the handset.

*To mute the microphone temporarily:

Press and hold PRIVACY , and the microphone is muted. Release PRIVACY to enable the microphone.

The status of master station depending on the

PRIVACY MODE

PRIVACY

LED When receiving a call from another When communicating

MODE

master station or remote site

with a door station

 

The microphone is muted.

Microphone is enabled.

 

When you press

TALK

 

The microphone

1

Lit

or lift the handset

to

 

 

is muted while

 

 

answer the call, the

 

pressing

 

 

microphone is enabled.

 

 

 

 

 

 

PRIVACY

.

 

The microphone is muted.

 

 

 

 

 

 

 

 

When you receive a call

 

 

 

 

 

from a master station or

 

 

 

 

 

remote site, the caller

 

 

 

 

 

and you are notified by a

 

 

 

2Lit tone that you are in the PRIVACY MODE. When you press TALK or lift the handset to answer

the call, the microphone is enabled.

The microphone is

 

 

enabled. Communication

 

 

starts when a direct voice

 

 

call arrives from a master

OFF

Off

station in your site or

remote site.

 

 

The microphone is muted while pressing

PRIVACY .

NOTE:

When "COMMUNICATION METHOD" is set to "PTT" (press-to-talk mode) in the "INITIAL SETTING", you do not have to activate the PRIVACY function.

26

Image 26
Contents Network Direct System Contents Sending e-mails Calling another station Direct voice call MonitoringViewing video images at Target station Paging About this manual PrecautionsIntroduction General Precautions Part Names Control panelMonitor Display item examplesDisplay examples Displaying call and/or paging record and reception recordIP vandal-resistant video door station IS-IPDV surface-mount IP vandal-resistant video door station IS-IPDVF flush-mountOutline of Operations Communication Master stations Paging Door stations Target Operation Electric door strike Door station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLSetting the call-in tones Door Call Tone Initial settings Initial SettingBasic setting procedure Setting the display modes of the monitor Display Press to select the desired search item so thatSchedule Destina Schedule destination Setting the call transferring TransferTransfer Destina Transfer destination Setting the Privacy function Privacy Initializing the set contents InitializationLights up Receiving a callCall tone rings, and the corresponding display appears When called in from a door station Communication in the hands-free modeCommunication in the press-to-talk mode Answer the call in one of the following waysPress-to-talk mode Communication by using the handsetHands-free mode About the priorityWide Zoom Switching Zoom/WidePan & Tilt Left Right DownTo restore the image before adjustment Adjusting imagesPress Adjust when the image is difficult to see Press Adjust againCommunication transferring Call transferringWhile receiving a call To communicate with the callerPlaced Calls →P Standby modeSearch items Name Search →PSystem in your site and to a network Search ListPaging Zone →P 002/002 Direct system in a remote siteSearching for a station, zone or remote site from the list Press to select the target station so that it is highlighted Select Stations by Type from the Search LIST. →PSelect Paging Zone from the Search LIST. →P Start paging by following the procedure for pagingFollowing the procedure for the corresponding Press to select the target zone so that it is highlightedPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PCalling another station direct voice call Press OFF or hang up the handset to finish communicatingTo shift to scan-monitoring MonitoringScan-monitoring To monitor only the desired station continuouslyViewing video images at the target station Or lifting the handsetOther Functions Technical Precautions Available Character ListIP vandal-resistant video door station flush-mount IS-IPDVF SpecificationsColor monitor IP master station IS-IPMV Warranty FCC

FK1629 specifications

The Aiphone FK1629 is a cutting-edge intercom system designed for both residential and commercial applications, providing enhanced communication capabilities and security features. A key characteristic of the FK1629 is its modular design, which allows for easy customization and scalability based on user needs.

One of the main features of the Aiphone FK1629 is its two-way audio system, enabling clear and effective communication between the entrance station and the user. The intercom supports a wide frequency range, ensuring that voices are transmitted without distortion, even in noisy environments. Additionally, it is equipped with noise-cancelling technology, which further enhances audio clarity by filtering out background sounds.

The FK1629 also incorporates advanced video capabilities, featuring a high-resolution camera that ensures excellent image quality. This is particularly useful for security purposes, as users can visually identify visitors before granting access. The camera typically offers a wide-angle view, capturing a broader field of vision to enhance situational awareness.

Integration with mobile applications is another highlight of the FK1629. Users can connect the intercom system to their smartphones or tablets, allowing for remote monitoring and communication. This feature not only increases convenience but also improves security, as users can respond to visitors even when they are not at home.

In terms of installation and setup, the Aiphone FK1629 is designed to simplify the process, featuring clear instructions and versatile mounting options. This makes it an ideal choice for both DIY enthusiasts and professional installers. The device is also durable, built with high-quality materials that ensure longevity and reliability under various conditions.

Moreover, the Aiphone FK1629 adheres to the latest safety standards and regulations, providing peace of mind for users concerned about security. With features such as encrypted communication, this intercom system is designed to protect against unauthorized access and ensure the privacy of conversations.

In summary, the Aiphone FK1629 intercom system stands out for its combination of audio and video communication, ease of use, mobile integration, and robust security features. Ideal for both homeowners and businesses, it represents a reliable solution for modern communication and safety needs.