Aiphone FK1629 operation manual Warranty, Fcc

Page 39

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, power surge, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide compensation for any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.

The object area of is the EU.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for help.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Network Direct System Contents Calling another station Direct voice call Monitoring Viewing video images at Target station PagingSending e-mails Precautions IntroductionAbout this manual General Precautions Control panel Part NamesDisplay item examples MonitorDisplaying call and/or paging record and reception record Display examplesIP vandal-resistant video door station IS-IPDVF flush-mount IP vandal-resistant video door station IS-IPDV surface-mountOutline of Operations Communication Master stations Paging Door stations Target Operation Electric door strike Door station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Press to select the desired search item so that Setting the display modes of the monitor DisplaySetting the call transferring Transfer Transfer Destina Transfer destinationSchedule Destina Schedule destination Initializing the set contents Initialization Setting the Privacy function PrivacyReceiving a call Call tone rings, and the corresponding display appearsLights up Answer the call in one of the following ways Communication in the hands-free modeCommunication in the press-to-talk mode When called in from a door stationAbout the priority Communication by using the handsetHands-free mode Press-to-talk modeLeft Right Down Switching Zoom/WidePan & Tilt Wide ZoomPress Adjust again Adjusting imagesPress Adjust when the image is difficult to see To restore the image before adjustmentCall transferring Communication transferringTo communicate with the caller While receiving a callName Search →P Standby modeSearch items Placed Calls →P002/002 Direct system in a remote site Search ListPaging Zone →P System in your site and to a networkSearching for a station, zone or remote site from the list Select Stations by Type from the Search LIST. →P Press to select the target station so that it is highlightedPress to select the target zone so that it is highlighted Start paging by following the procedure for pagingFollowing the procedure for the corresponding Select Paging Zone from the Search LIST. →PPress to select Received Calls in the standby mode. →P Press to select Placed Calls in the standby mode. →PPress OFF or hang up the handset to finish communicating Calling another station direct voice callTo monitor only the desired station continuously MonitoringScan-monitoring To shift to scan-monitoringOr lifting the handset Viewing video images at the target stationOther Functions Available Character List Technical PrecautionsSpecifications Color monitor IP master station IS-IPMVIP vandal-resistant video door station flush-mount IS-IPDVF FCC Warranty

FK1629 specifications

The Aiphone FK1629 is a cutting-edge intercom system designed for both residential and commercial applications, providing enhanced communication capabilities and security features. A key characteristic of the FK1629 is its modular design, which allows for easy customization and scalability based on user needs.

One of the main features of the Aiphone FK1629 is its two-way audio system, enabling clear and effective communication between the entrance station and the user. The intercom supports a wide frequency range, ensuring that voices are transmitted without distortion, even in noisy environments. Additionally, it is equipped with noise-cancelling technology, which further enhances audio clarity by filtering out background sounds.

The FK1629 also incorporates advanced video capabilities, featuring a high-resolution camera that ensures excellent image quality. This is particularly useful for security purposes, as users can visually identify visitors before granting access. The camera typically offers a wide-angle view, capturing a broader field of vision to enhance situational awareness.

Integration with mobile applications is another highlight of the FK1629. Users can connect the intercom system to their smartphones or tablets, allowing for remote monitoring and communication. This feature not only increases convenience but also improves security, as users can respond to visitors even when they are not at home.

In terms of installation and setup, the Aiphone FK1629 is designed to simplify the process, featuring clear instructions and versatile mounting options. This makes it an ideal choice for both DIY enthusiasts and professional installers. The device is also durable, built with high-quality materials that ensure longevity and reliability under various conditions.

Moreover, the Aiphone FK1629 adheres to the latest safety standards and regulations, providing peace of mind for users concerned about security. With features such as encrypted communication, this intercom system is designed to protect against unauthorized access and ensure the privacy of conversations.

In summary, the Aiphone FK1629 intercom system stands out for its combination of audio and video communication, ease of use, mobile integration, and robust security features. Ideal for both homeowners and businesses, it represents a reliable solution for modern communication and safety needs.
Top Page Image Contents