Aiphone FK1629 Setting the Privacy function Privacy, Initializing the set contents Initialization

Page 19

FSetting the PRIVACY function [PRIVACY]

Setting of the PRIVACY function is available when called from another master station.

When the PRIVACY MODE is activated, the microphone turns off and you will not be heard by the caller.

Sub item

Description

Setting range

[PRIVACY MODE]

Sets whether or not to

(PRIVACY MODE) 1:

 

activate the PRIVACY

The microphone is off

 

function. To activate

(mute).

 

the PRIVACY function,

(PRIVACY MODE) 2:

 

select the PRIVACY

The microphone is off

 

MODE 1 or 2.

(mute) and the caller

 

 

and you are notified by

 

 

a tone when you receive

 

 

the call that you are in

 

 

the PRIVACY MODE.

 

 

OFF:

 

 

The microphone is on.

[PRIVACY-2 CALL

(Available when

1-6

TONE]

(PRIVACY MODE) 2 is

 

 

selected.)

 

 

Selects the call tone

 

 

from 6 types.

 

1 Press repeatedly to select [PRIVACY] (so that it is highlighted), and then press ZOOM/WIDE to select.

The sub items are displayed.

*The sub items can also be displayed by pressing PRIVACY in the standby mode.

2 Press repeatedly to select the sub item [PRIVACY MODE] or [PRIVACY-2 CALL TONE] you wish to set (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

3 Make the settings on each sub item as follows.

[PRIVACY MODE]:

Press repeatedly to select the desired mode (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

*When (PRIVACY MODE) 1 or (PRIVACY MODE) 2 is selected, the LED on PRIVACY lights up (red).

[PRIVACY-2 CALL TONE]:

*This setting is available only when [PRIVACY MODE] is set to (PRIVACY MODE) 2.

Press repeatedly to select the desired call tone, and then press ZOOM/WIDE to decide on the selected one.

*You can check the selected tone by hearing it whenever selected.

GInitializing the set contents [INITIALIZATION]

You can reset all the set contents to default.

1Press repeatedly to select [INITIALIZATION] (so that it is highlighted), and then press ZOOM/WIDE to select.

“RETURN TO DEFAULT ?” is displayed.

2 Press ZOOM/WIDE to continue the initialization procedure.

3 Press repeatedly to select [YES] (so that it is highlighted) to perform initializing, and then press ZOOM/WIDE to select.

*Select [NO] if you will cancel initialization.

NOTE:

If you have repositioned the master station, initialize it to clear the speed dial settings etc., and make the settings again.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Network Direct System Contents Viewing video images at Target station Paging Calling another station Direct voice call MonitoringSending e-mails Introduction PrecautionsAbout this manual General Precautions Control panel Part NamesDisplay item examples MonitorDisplaying call and/or paging record and reception record Display examplesIP vandal-resistant video door station IS-IPDVF flush-mount IP vandal-resistant video door station IS-IPDV surface-mountOutline of Operations Communication Master stations Paging Door stations Target Operation Electric door strike Door station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessBasic setting procedure Initial settings Initial SettingSetting the call-in tones Door Call Tone Press to select the desired search item so that Setting the display modes of the monitor DisplayTransfer Destina Transfer destination Setting the call transferring TransferSchedule Destina Schedule destination Initializing the set contents Initialization Setting the Privacy function PrivacyCall tone rings, and the corresponding display appears Receiving a callLights up Answer the call in one of the following ways Communication in the hands-free modeCommunication in the press-to-talk mode When called in from a door stationAbout the priority Communication by using the handsetHands-free mode Press-to-talk modeLeft Right Down Switching Zoom/WidePan & Tilt Wide ZoomPress Adjust again Adjusting imagesPress Adjust when the image is difficult to see To restore the image before adjustmentCall transferring Communication transferringTo communicate with the caller While receiving a callName Search →P Standby modeSearch items Placed Calls →P002/002 Direct system in a remote site Search ListPaging Zone →P System in your site and to a networkSearching for a station, zone or remote site from the list Select Stations by Type from the Search LIST. →P Press to select the target station so that it is highlightedPress to select the target zone so that it is highlighted Start paging by following the procedure for pagingFollowing the procedure for the corresponding Select Paging Zone from the Search LIST. →PPress to select Received Calls in the standby mode. →P Press to select Placed Calls in the standby mode. →PPress OFF or hang up the handset to finish communicating Calling another station direct voice callTo monitor only the desired station continuously MonitoringScan-monitoring To shift to scan-monitoringOr lifting the handset Viewing video images at the target stationOther Functions Available Character List Technical PrecautionsColor monitor IP master station IS-IPMV SpecificationsIP vandal-resistant video door station flush-mount IS-IPDVF FCC Warranty

FK1629 specifications

The Aiphone FK1629 is a cutting-edge intercom system designed for both residential and commercial applications, providing enhanced communication capabilities and security features. A key characteristic of the FK1629 is its modular design, which allows for easy customization and scalability based on user needs.

One of the main features of the Aiphone FK1629 is its two-way audio system, enabling clear and effective communication between the entrance station and the user. The intercom supports a wide frequency range, ensuring that voices are transmitted without distortion, even in noisy environments. Additionally, it is equipped with noise-cancelling technology, which further enhances audio clarity by filtering out background sounds.

The FK1629 also incorporates advanced video capabilities, featuring a high-resolution camera that ensures excellent image quality. This is particularly useful for security purposes, as users can visually identify visitors before granting access. The camera typically offers a wide-angle view, capturing a broader field of vision to enhance situational awareness.

Integration with mobile applications is another highlight of the FK1629. Users can connect the intercom system to their smartphones or tablets, allowing for remote monitoring and communication. This feature not only increases convenience but also improves security, as users can respond to visitors even when they are not at home.

In terms of installation and setup, the Aiphone FK1629 is designed to simplify the process, featuring clear instructions and versatile mounting options. This makes it an ideal choice for both DIY enthusiasts and professional installers. The device is also durable, built with high-quality materials that ensure longevity and reliability under various conditions.

Moreover, the Aiphone FK1629 adheres to the latest safety standards and regulations, providing peace of mind for users concerned about security. With features such as encrypted communication, this intercom system is designed to protect against unauthorized access and ensure the privacy of conversations.

In summary, the Aiphone FK1629 intercom system stands out for its combination of audio and video communication, ease of use, mobile integration, and robust security features. Ideal for both homeowners and businesses, it represents a reliable solution for modern communication and safety needs.
Top Page Image Contents