8-14 Erasing Voice memos JF-2MED
1 Press MENU/MEMO button in the standby mode.
2 Select the memo that you want to erase with CALL button. Each time CALL button is pressed, the cursor switches between A, B, and C.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
SELECT 
PLAY 
REC 
ERACE 
3 Press MENU/MEMO button.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
SELECT 
PLAY 
REC 
ERACE 
4 Press CALL button to erase. Press PLAY button to stop the erasure and return to the Voice memo selection screen.
Once a Voice memo is erased, it cannot be restored.
02 DEC 18:45
02 DEC 18:47
02 DEC 18:48
DO YOU WANT TO ERASE MEMO?
5 Press TALK button to return to the standby mode.
English
Français
8-15 If optional units are installed
1 When a sensor is activated or a call button is pressed, the notification sound goes off and the transmit LED (red) flashes. A warning screen is displayed on the video monitor.
2 Press TALK button to stop the notification sound.
The notification sound volume is linked with "Chime tone volume control". When the chime tone volume control is turned "Off", the notification sound does not go off. However, when the EXTERNAL
SENSOR INPUT is set to 
,
Nederlands
NOTES: 1. The notification sound time is set in the EXTERNAL SENSOR INPUT. (Refer to section
The factory setting is 
.
2.When the EXTERNAL SENSOR INPUT is set to 
, door station 1 also emits a notification sound. (Door station 2 does not go off a notification sound.)
3.If a call is received from an entrance during the notification, the unit switches to the entrance call (communication is prioritized). However,
when the EXTERNAL SENSOR INPUT is set to 
, the notification continues to sound even if there is a call from an entrance.
4.When the EXTERNAL SENSOR INPUT is set to 
, there is automatic restoration after 30 seconds.
5.When the EXTERNAL SENSOR INPUT is set to 
or 
, the notification sound operates continuously until reset, however a warning screen ends after approx. 1 minute.
9 TECHNICAL PRECAUTIONS
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F) | • Cleaning: Clean the units with a soft cloth dampened with a neutral |
• The video image may distort slightly during activation of | household cleanser. Do not use any abrasive cleaner or cloth. |
door release. But this is not a unit malfunction. | • If there is a system malfunction, turn the Power switch at the monitor |
| station OFF and back ON again. If this does not solve the problem, unplug |
| the DC power supply and contact a qualified technician for service. |
10 SPECIFICATIONS
• Power: | DC 18 V |
• Current consumption: | (Max.) 400 mA |
| (Max.) 220 mA |
• Calling: | Chime and image, approx. 45 seconds |
• Communication: | |
| (PTT mode) |
• Video monitor: | |
• Scanning lines: | 525 lines |
•Door release contact: AC/DC 24 V, 0.5 A (N/O dry closure contact L, L) (Aiphone's
• Dimensions: | 179 (H) x 135 (W) x 32 (D) (mm) |
| 7" H x |
• Weight: | 440 g (0.97 lbs.) approx. |
| 420 g (0.93 lbs.) approx. |
- 15 -