Aiphone Intercom System Wiring Diagrams and Manuals for JF-2MED and JF-2HD

English

3 WIRING

Insert wires securely into each terminal as shown.

DOOR 1Video door station

AIPHONE

JF-DA

JF-DA

JF-2MEDMaster monitor station

JF-DV JF-DVF #2 #1

Français

Nederlands

A1 A2

2

NP

DOOR 2

AIPHONE

JF-DA

JF-DA

JF-DV JF-DVF JF-D

(Audio only)

Setting is required. (Refer to section 7-7)

A1 A2

2

NP

Optional call extension speaker IER-2

OP	1	E
		2
	IER-2	NP

Door release

P

2

- + DC 18 V

Power supply +, - (DC 18 V)

PS-1810DIN	PS-1820
230V AC	N
	L
IN 230V~ 50/60Hz NL
1A - +
-	100V - 240V -	18V DC
+		2 A
18V DC 1 A	50/60 Hz

Release connector	(BR)	L	[1]	Door release
	(RD)	L
#1					or
	(OG)	SW	[2]
	(YE)	SW			RY-3DL
Option connector	(BR)	V +	[3]
	(RD)	V -
	(OG)	b1	[4]	RY-3DL
#2	(YE)	b2
	(GR)	E
	(BL)	PK
	(PR)	FS		[6]	[5]
	(GY)	KS	[7]
	(WH)	E

To prevent shorts, be sure to cut unused lead wires at the bottom and insulate the ends.

Control external devices connected with release connector and option connector.

[1]Door release output Setting is required. (Refer to section 7-8) (AC/DC 24 V, 0.5 A N/O dry closure contact)

Connect the brown and red wires from the release connector to the door release (or to the RY-3DL as shown in the wiring diagram).

[2]Options output

(AC/DC 24 V, 1.6 A N/O dry closure contact)

Door release EL-9S (AC 12 V, 0.35 A) or	OP
equivalent, requires a separate AC transformer.
Run separate cables for audio/video and door
release.
Door release contact: AC/DC 24 V, 0.5 A
(N/O dry closure contact L, L).

2

NP

EL-9S PT

[3]Video signal output

(NTSC, 1 Vp-p/75 Ω) Wiring distance: 3 m

NOTES: When video signal is output to the external equipment, it may be possible to hear the buzz noise

[1]	from master station. Consult AIPHONE distributor.
	[4] Door release-linked entrance output

[5]	Press-to-talk setting input
	If the blue and white wires are shorted, press-to-talk will not
	be operable.
[6]	Foot switch input

Optional selective door release		RY-3DL
adaptor RY-3DL	EL-9S	L1
Use RY-3DL when connecting			b1
door release to 2 locations.	EL-9S	C1
		L1	b2
		L2	b3
			L
		C2	D1
		L2	E
		PT	D2
PT AC Transformer			+
			–

JF-2MED

Option connector

OG(b1)

YE(b2)

GR(E)

Release connector

BR(L)

RD(L)

DC 18V

+

–

Connect a commercially-available foot switch to the purple
and white wires (N/O dry closure contact).
[7] External sensor input	Setting is required. (Refer to section 7-9)

		N/O dry closure contact
	Input method	External sensor input
		(start signal only detection method)
	Detection confirmation time	100 mS or more
	Contact resistance	During dry closure: Less than 700 Ω
PS18	Terminal short current	Less than 10 mA
	Voltage between terminals	Less than DC 20 V
		(when open between terminals)

- 4 -