Aiphone JF2HD, JF-2MED operation manual Mounting, Names

English

4 MOUNTING

Back wiring	Mounting screws x 2
	JF-2MED
	JF-2HD

Peel off the protective film from the display surfaces of the JF-2MED and JF- 2HD.

1-gang box

83,5 mm (3-5/16")

Mounting bracket

Français

1.Press the RELEASE button (to insert or remove the wire).

2. Insert the cable into the terminal. 1 2

9mm (3/8")

Nederlands

Surface wiring

*When a 1-gang box is not mounted, the cable can be surface-run to the top or bottom of the unit. Cut the cable inlet to allow passage of the wiring into the unit.

Wood mounting screws x 2

∗ Cut open the cable inlet hole to run wires to the back of the unit.

83,5 mm (3-5/16")

Mounting bracket

PS-1820PS-1810DIN

Mounting bracket

Din rail

1-gang box

83,5 mm (3-5/16")

5	NAMES
	JF-2MED			JF-2HD
	[1]			[1]
[2]	[4]	[12]	[2]	[4]	[12]
		[13]			[13]
[3]	[5]		[3]	[5]
	[6]	[14]		[6]	[14]
[7]			[7]
[8]		[15]	[8]		[15]
[9]			[9]
	[10]			[10]
	[11]			[11]

[1]	Microphone	[11]	TALK button
[2]	Color LCD video monitor (3-1/2" color)	[12]	Screen brightness control
[3]	CALL button, door call-in LED (red)	[13]	Receive volume control (high to off)
[4]	PLAY button, play LED (red)	[14]	Chime tone, alert sound volume (high to off)
[5]	REC button, record LED (red)	NOTES: 1. Even when the volume is turned "Off", sometimes it may be possible to faintly
[6]	MENU/MEMO button, memo LED (red) (JF-2MED)		hear the entrance chime tone depending on the surrounding area.
	MENU button (JF-2HD)		2. The volume of chime tone and the notification sound will not change while they
[7]	POWER switch		are operating even if the volume control is adjusted. The adjusted volume will
[8]	MONITOR button		apply from the next call-in or notification. (JF-2MED only)
[9]	Speaker	[15]	Call-in setting switch
[10]	Transmit LED (red)		"1": Call-in from door station 1 only.
			"2": Call-in from door station 2 only.
			"1&2": Call-in from both door station 1 and door station 2.

- 6 -