Aiphone JK-DVF-AC operation manual FUNCTIONS/SETTING UP for Access Control

Page 8

Nederlands Français English

FUNCTIONS/SETTING UP FOR ACCESS CONTROL

This section explains the settings of each function, including the master code for management, the user code for unlocking, the buzzer and the LEDs.

About the setting mode:

Enter master code twice to switch to the setting mode, and enter the following setting code to perform the settings for the desired function. After settings have been made, enter the following setting codes to continue the setting operation. Press to exit the setting mode.

 

Setting items

 

Allowable setting range

Default value

Setting code

Setting the code length

 

 

4, 5, or 6 digits

4 digits

 

Change the length of the master code and the user code.

 

 

 

 

)They both must be the same length.

 

 

 

 

 

Setting the master code

 

 

1

1234

 

Enter a master code using between 4 and 6 digits (alpha or numeric) to

Valid keys: 0 - 9, A, B

 

 

switch to the setting mode.

 

 

 

 

 

) The number of digits in the code can be set by setting the code length.

 

 

 

Setting the code for user group 1

 

Number of codes: 60

-

-

Set the unlocking code for user group 1.

 

 

Valid keys: 0 - 9, A, B

 

 

) The number of digits in the code can be set by setting the code length.

 

 

 

Setting the code for user group 2

 

Number of codes: 40

-

-

Set the unlocking code for user group 2.

 

 

Valid keys: 0 - 9, A, B

 

 

) The number of digits in the code can be set by setting the code length.

 

 

 

Setting the key illumination time

 

 

Illumination time: 10 to 99

10 Sec.

 

Set the length of time that the keys will be lit up after they are pressed.

seconds, or continually lit

 

 

Setting the relay 1 output time

 

 

Output time: 1 to 99

3 Sec.

 

Set the output time of relay 1.

 

 

seconds, or latched

 

 

Setting the relay 2 output time

 

 

Output time: 1 to 99

3 Sec.

 

Set the output time of relay 2.

 

 

seconds, or latched

 

 

Reset Settings

 

 

 

-

-

 

Return all the settings to their default values.

 

 

 

 

External output setting

 

 

· OFF

OFF

 

The alarm or security system connected to the terminal of relay 2 will be

· During Lockout

 

 

activated when the "Lockout" * or the forced entry* is carried out.

· During forced entry output

 

 

* "Lockout": Refer to VIII below. *Forced entry: This function is linked with

· During lockout and forced

 

 

the door open/close sensor (N.C.) which is connected to PB2 and C, and

entry output

 

 

carried out when opening the door without activating this unit. (For example,

 

 

entry in an improper manner, manual unlock, etc.)

 

 

 

 

) If there is a way to open the door without activating this unit, such as

 

 

 

manual unlock, do not make the external output setting for the forced entry.

 

 

 

Lockout

 

 

 

ON/OFF

OFF

 

If several incorrect access codes are attempted, the code input function is

Invalid number of times:

 

 

disabled for a programmed period of time.

 

10 to 99 times

 

 

· When "Lockout" is activated, the LED (Orange) indicator and the keypad

Invalid time:

 

 

blink, and the buzzer sounds for 3 seconds. This is just a sound to inform

10 to 99 seconds

 

 

you that the function has been activated. It is not a warning sound. If you

 

 

want a warning to be sounded, please use the external output function to

 

 

 

activate a commercially-available alarm device.

 

 

 

 

· The unlock function will work when the request to exit/entry button is

 

 

 

pushed, even while the "Lockout" function is operating.

 

 

 

 

Auto-relock (Anti-tailgate)

 

 

ON/OFF

OFF

 

After the door has been linked to the door open/close sensor (N/C), and

 

 

 

unlocked, it will relock itself one second after being closed, thus preventing

 

 

 

the entry of an unauthorized third party.

1

 

 

 

 

Timer-linked unlocking setting

 

 

Linked relay: relay 1

Linked relay: relay 1

 

The system can be set to unlock the door by pressing the

key within

relay 2

0 key illumination: OFF

 

the set time and linking it to the external timer (N/O). The operations for the

relay 1 and 2

 

LEDs and the buzzer after unlocking are the same as those used to perform

0 key illumination: ON/OFF

 

 

user code unlocking. When the door is linked to the timer, unlocking can be

 

 

performed using the user code and the request to exit/entry button. When

 

 

 

latch output is performed for the relay settings, the relay turns ON/OFF

 

 

 

every time the

key is pressed.

 

 

 

 

 

 

 

 

 

 

 

Operation tone settings

 

 

ON/OFF

ON

 

Set the tone heard when the keypad is being used to ON/OFF.

 

 

 

The setting can be saved even when the power is off.

The system cannot be switched to the setting mode while the relay is unlocked.

When the setting mode has been activated and no operations are performed for approximately 120 seconds, the system will exit the setting mode. (If a key is pressed during that time, the timer will start over.)

Neither the request to exit/entry button nor the timer-linked unlocking key can be operated, and unlocking using the user code cannot be performed while the setting mode is activated.

The volume (the check tone, operation tone, etc.) from the door station may become lower according to the mounting status.

1 : When the auto-relock is used, the request to exit/entry button for relay 2 cannot be used. The output of relay 2 is

7only possible when user code unlocking is performed.

Image 8
Contents JK-DVF-AC Group 1 / groupe 1 / groep Group 2 / groupe 2 / groep OFFAAN UIT Precautions ContentsMounting locations Package ContentsMounting Part Names MountingTerminal names Wiring and ConnectionsOutline of connections and wiring distance Connection examples Connection of Relay 1 onlyFUNCTIONS/SETTING UP for Access Control English Français Nederlands Default 10 Sec Default 3 Sec Lockout Default OFF Auto-relock Anti-tailgate Operation of Access Control Technical PrecautionsTimer-linked unlocking Unlocking using the request to exit/entry buttonSpecifications WarrantyAccess control keypad General