Aiphone JK-DVF-AC operation manual Precautions, Contents

Page 3

English

Thank you for selecting Aiphone for your communication and security needs. Please read this manual carefully before installation, and keep it in a safe place for future reference.

*Refer to the “INSTALLATION & OPERATION MANUAL” for the JK-1MED or JK-1MD for complete information regarding this system.

English

PRECAUTIONS

General Prohibitions

Prohibition to Dismantle the Unit

WARNING

(Negligence could result in death or serious injury to people)

1. The unit must be installed and wired by a qualified technician. Having installation performed by an unqualified technician could result in electric shock.

2. Do not connect any non-specified power source to the V, V terminals, and do not install two power supplies in parallel to a single input. Fire, damage to the unit, or system malfunction could result.

3. The unit is not explosion-proof. Do not install or use near gases or flammable materials. Fire or explosion could result.

4. Do not dismantle or alter the unit. Fire or electric shock could result.

5. Do not allow the wires or DC output terminals to be shorted. Fire or electric shock could result.

6. Existing wiring such as chime wiring, etc. may contain high voltage AC electricity. Damage to the unit or electric shock could result. Wiring and installation should be done by a qualified technician.

CAUTION

(Negligence could result in injury to people or damage to property)

1. When mounting the unit on a wall, install the unit in a convenient location, but not where it could be jarred or bumped. Injury could result.

2. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or damage to the unit.

3. Before turning on power, make sure wires are not crossed or shorted. Fire or electric shock could result.

General Precautions

4. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.

*Places subject to dust, oil, chemicals, hydrogen sulfide (hot spring).

*Places subject to moisture and humidity extremes, such as bathroom, cellar, greenhouse, etc.

*Places where the temperature is quite low, such as inside a refrigerated area or in front of air- conditioner.

* Places subject to steam or smoke (near heating or

cooking surfaces).

*Where noise generating devices such as dimmer switches, invertor electrical appliances, are closeby.

5. Do not put anything on the unit or cover the unit with cloth, etc. Fire or unit trouble could result.

GENERAL PRECAUTIONS

1.This product, being a control unit of door release, should not be used as a crime-prevention device.

2.This product is weather-resistant, but do not spray high-pressure water on it. Unit trouble could result.

3.The product becomes inoperative during power failure.

4.As to other manufacturer's devices, such as sensor, door releases, timer, used with this system, comply with the Specifications and Warranty conditions manufacturers or venders present.

5.When outside temperature lowers sharply after rainfall, etc., the inside of the camera may fog up slightly, causing a blurry picture, but this is not a malfunction. Normal operation will be restored when moisture evaporates.

6.Due to the environmental sound around the unit, it may hinder smooth communication, but this is not a malfunction.

Français Nederlands

CONTENTS

RECORD OF SETTINGS AND REGISTRATION

WIRING AND CONNECTIONS… …………………………… 5

DETAILS FOR ACCESS CONTROL……………………… 1

FUNCTIONS/SETTING UP FOR ACCESS CONTROL… 7

PRECAUTIONS… …………………………………………… 2

OPERATION OF ACCESS CONTROL………………… 11

PACKAGE CONTENTS… …………………………………… 3

TECHNICAL PRECAUTIONS… ………………………… 11

MOUNTING… ………………………………………………… 3

SPECIFICATIONS… ……………………………………… 12

PART NAMES… ……………………………………………… 4

WARRANTY………………………………………………… 12

2

Image 3
Contents JK-DVF-AC OFF AAN UITGroup 1 / groupe 1 / groep Group 2 / groupe 2 / groep Contents PrecautionsPackage Contents MountingMounting locations Mounting Part NamesWiring and Connections Outline of connections and wiring distanceTerminal names Connection of Relay 1 only Connection examplesFUNCTIONS/SETTING UP for Access Control English Français Nederlands Default 10 Sec Default 3 Sec Lockout Default OFF Auto-relock Anti-tailgate Unlocking using the request to exit/entry button Operation of Access ControlTechnical Precautions Timer-linked unlockingGeneral SpecificationsWarranty Access control keypad