2Turn the bracket around and re- insert the bracket to the back of the base station.
4.3Install your phone
Before using the handset, the batteries have to be installed and fully charged.
4.3.1Install battery
!Warning
Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.
1Slide out the battery cover.
2 Place the batteries in the correct polarity as indicated and replace the cover.
3Slide the base down into place.
4Use the pedestral wall mounting to plug your base station.
Getting started
4.3.2Charge battery
!Warning
The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved.
1Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly.
15