Philips CD1551B manual Controlling the answering machine from An external call, Set voice language

Page 42

10.6.2.2Controlling the answering machine from

an external call

1 From another phone, dial home.

• The answering machine answers and starts playing your greeting message.

2Within 8 seconds, press # key on the phone you used to dial and enter the remote access code (same as your Master PIN code).

•If the access code is incorrect, an error tone will be emitted. After the error tone is emitted, you can try to press the remote access code again until you enter the correct number.

•The answer machine will drop the line immediately if there is no detection of the master PIN entry within 8 seconds.

•If the remote access code is correct, a validation tone can be heard.

The following table indicates how to access the below features during remote access procedure:

Keys	Description
#	Enter the remote access
	code if the answering
	machine is on and outgoing
	message is playing.

1	Return to previous message

2	Play the message

3	Skip to next message

6	Delete current message

7	Turn on the answering
	machine

8	Stop message playback

9Turn off the answering machine

Note

If the answering machine is off, the phone will enter into the remote access mode after 10 rings. Enter the remote access PIN (default is 0000) to activate the remote access feature.

10.6.3 Set voice language

This menu allows you to change the language of the predefined outgoing message. The availability of this menu and the language options available are country dependent.

1Press min idle mode, scroll :

to ANSWER MACHINE and press

<OK, scroll :to SETTINGS and

press <OK, scroll :to VOICE LANGUAGE and press <OK.

•The current selected language is highlighted.

2Scroll :to your preferred language and press <OK to confirm.

•A validation tone is emitted and the screen returns to previous menu.

10.6.4 Call screening

Call screening allows you to hear the caller while he is leaving a message. You can then decide if you want to talk to the caller directly.

From the base,

You can use +and -to adjust the speaker's volume during call screening. The lowest volume level turns call screening off.

40	Telephone answering machine (TAM)

Image 42

Contents US-EN Telephone answering machine Page Table of contents Set the answer mode Clock and AlarmAdvanced settings Technical data Frequently asked Questions42 IndexEquipment Approval Information Safety informationSafety information Notification to the Local Telephone CompanyPage Receiving antenna is connected Hearing Aid Compatibility HACFCC RF Radiation Exposure Statement Power requirements AppropriateConformity Electric, Magnetic Electromagnetic Fields EMF Service Centers US service center Your phone Congratulations on your purchase and welcome to PhilipsNavigation keys Overview of your phone Earpiece OK keyBack/Clear key c Talk key rMute key M Microphone Battery door LoudspeakerRinger off key # Call transfer/Intercom keyiKey Displays when in menu mode to confirm your selectionDisplay icons Status bar Back keyOn/Off key o Overview of the base station Earpiece Volume keys +LED indicator around the Play Stop key Delete key fGetting started Connect the base stationInstall your phone Install batteryCharge battery Battery icon on the display Blinks during charge TipMenu structure Change PIN Using your phone Handsfree answering Answer a callCall is established Handset loudspeaker is activatedUse more of your phone Store a contact Phonebook Using your phonebookAccess phonebook Modify a phonebook entry6.2 Delete direct access Memory Direct access memory6.1 Add/edit direct access Memory Delete a phonebook entryUsing the call log Using the redial listAccess redial list Save a redial number into PhonebookSave call list entry into the phonebook Access call listConsulting the call list Delete a call list entryTransfer an external call to another handset Using the intercomIntercom another handset Answer an external call During intercomHandset locating Press Vkey on the base stationAll the registered handsets start to ring To Personal SET and press Personal settingsHandset Tones Set the ring volume Set the tones melodyPersonal settings Change the display languageActivate/deactivate auto hang-up Clock and Alarm Scroll to Melody 1, Melody Set alarm toneClock and Alarm Or Melody 3 and press OK to ConfirmRegistration Advanced settingsChange Master PIN During 5sTo Advanced SET and press Reset unitAdvanced settings Set area codeChange the dial mode Change flash timeSet first ring Default settings Telephone answering machine TAM Delete all messages 10.1.2 Playback of new messages via handsetPlayback of old messages via handset To Answer MachineRecord your personalised outgoing message OGM Remote control access Answer mode is setAnswering machine settings Ring delay Activate/deactivate remote accessTo Answer Machine and press Controlling the answering machine from An external callSet voice language Current selected language is highlightedProgressive LCD backlight Technical dataPower consumption at idle mode around 800mW Colour of the LCD backlight is AmberIcon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a callMy handset keeps going into idle mode Cannot change the settings of my voice mailHandset warms up when making a long call Remote control access does not workIndex Page Page PrintedinChina