Philips CD1551B manual Advanced settings, Change Master PIN, Registration, During 5s, Unregister

Page 34

9 Advanced settings

9.1Change Master PIN

The Master PIN is used for accessing the answering machine remotely. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

Note

The default pin code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll : to CHANGE PIN and press <OK.

2Enter the Master PIN when prompted and press <OK to confirm.

• The PIN entered will be shown as

asterisks (*) on the screen.

3Enter the new PIN and press <OK to confirm.

•A validation tone is emitted and the screen returns to previous menu.

Tip

If you forget your PIN, you will need to reset your phone to its default settings. See “Reset unit” on chapter 9.4 for more details.

9.2Registration

The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 4 handsets can be registered to one base station.

1Insert battery to power up the handset. The LCD displays "PRESS

OK KEY TO REGISTER".

2Press <OK on handset, the LCD displays "HOLD LOCATOR KEY

DURING 5s".

3Within 5 minutes, press the locator

key on base station to start registration.

4If registration succeeds, the handset returns to idle mode.

5 If registration fails, the LCD will display "PRESS OK KEY TO REGISTER". Repeat the process again.

9.3 Unregister

1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll : to UNREGISTER and press <OK.

2 Scroll :to select the handset number to unregister and press <OK.

• A validation tone is emitted to indicate successful unregistration and the screen return to previous menu.

32	Advanced settings

Image 34

Contents US-EN Telephone answering machine Page Table of contents Set the answer mode Clock and AlarmAdvanced settings Technical data Frequently asked Questions42 IndexEquipment Approval Information Safety informationSafety information Notification to the Local Telephone CompanyPage Hearing Aid Compatibility HAC Receiving antenna is connectedFCC RF Radiation Exposure Statement Power requirements AppropriateConformity Electric, Magnetic Electromagnetic Fields EMF Service Centers US service center Your phone Congratulations on your purchase and welcome to PhilipsNavigation keys Overview of your phone Earpiece OK keyBack/Clear key c Talk key rMute key M Microphone Battery door LoudspeakerRinger off key # Call transfer/Intercom keyiKey Displays when in menu mode to confirm your selectionDisplay icons Status bar Back keyOn/Off key o Overview of the base station Earpiece Volume keys +LED indicator around the Play Stop key Delete key fGetting started Connect the base stationInstall battery Install your phoneCharge battery Battery icon on the display Blinks during charge TipMenu structure Change PIN Using your phone Handsfree answering Answer a callCall is established Handset loudspeaker is activatedUse more of your phone Store a contact Phonebook Using your phonebookAccess phonebook Modify a phonebook entry6.2 Delete direct access Memory Direct access memory6.1 Add/edit direct access Memory Delete a phonebook entryUsing the call log Using the redial listAccess redial list Save a redial number into PhonebookSave call list entry into the phonebook Access call listConsulting the call list Delete a call list entryTransfer an external call to another handset Using the intercomIntercom another handset Answer an external call During intercomPress Vkey on the base station Handset locatingAll the registered handsets start to ring To Personal SET and press Personal settingsHandset Tones Set the ring volume Set the tones melodyChange the display language Personal settingsActivate/deactivate auto hang-up Clock and Alarm Scroll to Melody 1, Melody Set alarm toneClock and Alarm Or Melody 3 and press OK to ConfirmRegistration Advanced settingsChange Master PIN During 5sTo Advanced SET and press Reset unitAdvanced settings Set area codeChange flash time Change the dial modeSet first ring Default settings Telephone answering machine TAM Delete all messages 10.1.2 Playback of new messages via handsetPlayback of old messages via handset To Answer MachineRecord your personalised outgoing message OGM Remote control access Answer mode is setAnswering machine settings Ring delay Activate/deactivate remote accessTo Answer Machine and press Controlling the answering machine from An external callSet voice language Current selected language is highlightedProgressive LCD backlight Technical dataPower consumption at idle mode around 800mW Colour of the LCD backlight is AmberIcon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a callMy handset keeps going into idle mode Cannot change the settings of my voice mailHandset warms up when making a long call Remote control access does not workIndex Page Page PrintedinChina