Philips CD4502B/17, CD450XY/ZZ, SE450XY/ZZ manual Power requirements

Page 8

2 Important

This product is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

2.1Power requirements

This product requires an electrical supply of 100-240 volts, single-phase alternating current, excluding IT installations defined in standard UL 60950.

The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard UL 60950). Following a power cut, the call in progress, as well as the date and time settings will be lost.

Use only Class 2 Power Source or Limited Power Source (L.P.S.), rated of 7.5 V dc, 400 mA for Model CD450XY/ZZ and SE450XY/ZZ; rated of 7.5 V dc, 200 mA for Model CD455C and SE455C.

!Warning

Do not allow the handset to come into contact with liquids or moisture.

6

Do not open the handset, base station or charger. This could expose you to high voltages.

Do not allow the charging contacts or the battery to come into contact with conductive materials.

There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the power supply and telephone socket during a storm.

Do not use the handset in an explosive hazard area such as where there is gas leaking.

It is recommended that this product is not used near intensive care medical equipment or by persons with pacemakers.

This product can interfere with electrical equipment such as answering machines, television, radio, and computers if placed too close. We recommend that you position the base station at least one meter from such appliances.

Use only the main adapter supplied with this equipment. Incorrect adapter polarity or voltage can seriously damage the unit.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use the recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

Handsfree activation could suddenly increase the volume in the earpiece to

Important

Image 8
Contents US Telephone Page Table of contents Calling Features Network ServicesExtra Features Call logDefault pre-programmed Settings Technical Data Frequently asked Questions AppendixSystem IndexImportant Safety Instructions Do not overload wall outletsIf the product’s cabinet has been damaged Power requirements Battery life may be shortened in low temperature conditions ConformityEnvironmental Packaging informationPage Handset Battery door With Bracket Power supply NiMH AAA RechargeableGuarantee Quick start Your phoneOverview of your phone Call Log/Up key u OK keyBack/Clear key c Talk/Flash key rOverview of the base station Handset locator key Locate handsets Enter registration modeLoudspeaker Battery door Headset jack Display icons MenusBrowsing the menus TipGetting started Connect the base stationWall mounting the base CD450 Getting startedWall mounting the base SE450 Turn the bracket aroundRe-insert the bracket to the back of the base station Install your handset Charge the handsets for 24 hours before initial useSetting the clock Setting the date and timeSelect Clock & Alarm SET DATE/TIME. Press OK Setting the date and time formatSwitching on your handset Switching your handset onSwitching off your handset Phonebook Clock /ALARM This menu item is country-dependent Getting startedActivate Deactivate Call LOG Call Making a callPre-dialing Redialing the last numberAdjusting the earpiece volume Using the speaker or handsfreeEnding a call Answering a callPress r Press OK. Select Start 2ND CALL. Press OK again Your first call will be put on holdToggling between two external calls PressCalling another handset To toggle between the callsTransferring a call Making a conference callExternal call is put on hold automatically Press eto end the conference callDuring the conference call Input table Text and NumbersEntering text and numbers Phonebook Viewing the phonebookSearching by the first character Press OK. Select PHONEBOOK. Press OKSetting VIP melodiesm Using quick dialmEditing a record Select Phonebook Edit ENTRY. Press OKCancelling a quick dial key Quick dial key is cancelledEditing a quick dial key Press m.mCall log Viewing the call recordsReturning a call Saving a call record to your phonebookEnter and edit the name if necessary. Press OK Deleting a call recordSelect DELETE. Press OK Deleting all call recordsRedial List Custom Options Select Advanced SET XHD SOUND. Press OK Calling Features Activating/deactivating call barring Select Advanced SET Call BARRING. Press OKSelect Number Number 1 2 Area code managementSelect Advanced SET First RING. Press OK This feature only applies to models with first ring supportTurning first ring on/off Network Services Editing the voicemail service numbers Calling the call return service centerSelect NETW. Services Call Return CALL. Press OK Editing the call return service center numberEditing the cancel call back service number Select NETW. Services Withhold ID ACTIVATE. Press OKWithholding IDm Activating withhold IDExtra Features Setting the easy call number Deactivating easy callKeypad lock Locking the keypadSystem All settings have been reset Default pre-programmed settings Language English Handset NameDate Unchanged Date Format XHD Sound Incoming Call Log Empty Redial List PIN Code 0000Technical Data Connection Signal icon flashing Set-up Registration fails continuouslySound No dialing tone No parking tonePhone may be at a location with thick walls. Move the base Handset does not ringCheck that the handset ringer is turned on. See Caller ID does not displayRights of the Phone Company AppendixEquipment approval Information Please specify stock number When ordering copies Temporary discontinuance, the telephone company mustAppendix Receiving antenna is connectedNoise FCC RF Radiation Exposure StatementHearing Aid Compatibility HAC PrivacyRbrc seal US / Canada Service CenterDo not attempt to repair or modify this equipment Entering text and numbers 27 Extra Features IndexPage