Philips SE4502B manual XHD Sound, Scroll n to Change PIN and press o Select, Registration

Page 47

10.4XHD Sound

XHD (extra high definition) Sound can increase voice quality when On. The default setting is On.

To turn it off:

1Press m in idle mode, scroll n to Advanced Set and press o

Select.

2Scroll n to XHD Sound and press o Select.

3Scroll n to select On or Off and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

10.5Change PIN

The PIN is used for setting call barring numbers and registration/unregistration of handsets. The default PIN number is 0000. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

Note

The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1Press m in idle mode, scroll n to Advanced Set and press o

Select.

2Scroll n to Change PIN and press o Select.

3Old PIN: will be displayed. Enter the current PIN and press o OK.

•The PIN entered will be shown as asterisks (*) on the screen.

•If you enter an incorrect PIN number, an error tone will sound and “Wrong PIN!” will be displayed. Then, you will be

prompted to enter the current PIN again.

4New PIN: will be displayed. Enter the new PIN and press o OK.

5Confirm PIN: will be displayed.

Enter the new PIN again and press o OK to confirm PIN change.

•A validation tone is emitted, Saved! is displayed and the screen returns to the Advanced Set menu.

Tip

If you forget your PIN, you will need to reset your phone to its default settings. For more details, see section 10.8 - “Reset Unit.”

10.6Registration

If you wish to register an additional handset or if you have inadvertently unregistered your phone’s handset and want to re-register it, follow the procedure described below. This is the procedure for registering handsets of one of the model described in this manual. Procedures may vary for other types of handsets. In this case, please refer to the manufacturer of the handset. Additional handsets must be registered to the base station before you can use them. Up to 8 handsets can be registered to one base station. The PIN is required before you can register or unregister handsets.

Advanced settings

45

Image 47

Contents SE450 US-EN Telephone Page Table of contents Advanced settings 10.1 Easy Call Personal settingsBusy Activation Codes 11.2.2 Network Service11.3 Call Forward when Unanswered Technical data Frequently asked Questions56Read and understand all instructions Important Safety InstructionsDamage to the product Important Safety InstructionsTelephone connection Environment and safetyBattery requirements Environmental care Following a power cut, the call in progress is lostPrecautions Rights of the Phone Company Equipment Approval InformationNotification to the Local Telephone Company Environment and safety FCC RF Radiation Exposure Statement Hearing Aid CompatibilityPower requirements Electric, Magnetic and Electromagnetic Fields EMF Rbrc sealService Centers US service center Congratulations on your purchase and welcome to Philips Your phoneBack/Clear key c Overview of your phone Event LEDEarpiece Display Select key oCall transfer key & Intercom key Headset jack Battery doorNumber keys Mute key sClear Display icons and MessagesBack Overview of the base station Paging key a Page handset Long press to start registration procedureGetting started Getting startedSlide out the battery cover Install your phoneInstall battery Tip Charge batteryIcon Diameter 2.5 mm Install optional headsetUsing multipacks Phonebook Menu structureSE450 has five menus as shown in the following table Menu NameList of languages Enter date & time Clock and AlarmEnter PIN Advanced SettingsNetwork Services Using your phone Handsfree answering Call using Direct Access MemoryEnter a Dialing Pause Answer a callUse more of your phone Select Access phonebookChain dialing Store a contact in the phonebookView Modify a phonebook entry 1 Press m in idle modeScroll n to Edit Entry and press o Select 7.1 Add/Edit Direct Access Memory Delete a phonebook entry 1 Press m in idle modeDelete all phonebook entries 1 Press m in idle mode Direct Access MemoryMenu Scroll n to Delete and press o Select Delete Direct Access MemoryUsing the Redial list Access Redial listCall waiting Using the Call logAccess the Call log Delete a redial numberPress o OK Display shows the caller informationTo choose the format for call log display Save call list entry into the phonebookIntercom another handset Note Using the IntercomDelete a call list entry Press o MenuHandset locator Answer an external call during intercomBetween an internal or external call Establish a three-party conference callSelect Set Date/Time is highlighted. Press o Select Clock & Alarm, and press o SelectSelect Scroll n to Alarm and press o Select Set Date and TimeSelect Handset Name is highlighted press o Select Personal settingsSet Alarm Tone Select Scroll n to Language and press o Select Set the Ring TonesRing Tones and press o Select Scroll n to Backlight Time and press o Select Default setting for auto hang up is On Scroll n to Color Theme and press o Select Set Easy Call number Advanced settingsAdvanced Set and press o Select Auto Conference Set Call Barring ModeConfirm PIN will be displayed XHD SoundScroll n to Change PIN and press o Select Prompted to enter the current PIN againUnregister Reset UnitSelect Scroll n to Register and press o Select Easy registrationPress o OK to confirm Prefix is displayed on the screen Scroll n to Reset and press oSet Area Code Scroll n to Auto Prefix and pressAdvanced Set, and press o Select Change the Dial ModeChange Flash time Parameter Default Value Network ServiceDefault Settings Parameter Default Value Select Scroll n to Call Forward and press o Select Call Forward, Call ForwardCall Forward Change Call Forward Activation CodesBusy, scroll to Deactivate and press o Select Call Forward when BusyNetw. Services, and press o Select Call Forward screenSelect Scroll n to Call Fwd Unans and press o Select Call Forward when UnansweredChange Call Forward when Unanswered Activation Codes Call Fwd Busy screenSet Voice Mail Number Change Call Forward when Unanswered Deactivation CodeAccess Voice Mail Voice MailSet Call Return Service Number Access Info ServiceSelect Scroll n to Settings and press o Select Access the Call Return ServiceWithhold ID Call the Cancel Call Back NumberSelect Scroll n to Cancel Call BK and press o Select Set the Cancel Call Back NumberHandset does not charge Technical dataConnection Handset does not switch on Set-up Searching... is displayed on handset Icon is not blinking during chargeCommunication is lost during a call Phone is Out of rangeCaller number is not displayed Cannot change the settings of my voice mailMy handset keeps going into idle mode Handset cannot be registered to the base stationIndex Index Set Info Service Number Set the Backlight Time UCZZ01978UZ0