2Scroll n to the handset number you wish to transfer your external
call to and press o Select.
3Press t on the called handset to answer the internal call, where both internal callers can talk.
• Intercom is established.
4Press h on the first handset to transfer the external call to the called handset.
•The external call is transferred.
Note
If there is no answer from the called handset, press i to resume the
external call.
8.10.3Answer an external call during intercom
1During intercom, a new call tone is emitted when there is an incoming
external call.
2Press h to exit intercom mode.
3 Press t to pick up the external call.
8.10.4 Switch between an internal
and external call During the call, press i to switch
between an internal or external call.
8.10.5Establish a three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
1During the call, press i to put the external call on hold (the caller can
no longer hear you).
•The display shows the numbers of the handsets registered to the base.
2Scroll n to the number of the
handset you wish to establish the conference call with and press o
Select.
3Press t on the called handset to answer the internal call, where both
internal callers can talk.
• Intercom is established.
4Press c Conf. or long press i on the first handset to start the
•Conference will be displayed on the screen once the conference call is established.
8.11Handset locator
The handset locator feature enables you to locate a missing handset if the handset is in range and contains charged batteries.
1Press a on the base station.
•All the registered handsets start to ring.
•Once a handset is found, press c Silent on a handset to stop
its ringing.
2Press a again to end the handset locator.
Note
If there are no key presses within 30 seconds, the handset will automatically return to idle mode.
38 | Use more of your phone |