Philips SE4502B manual Following a power cut, the call in progress is lost, Environmental care

Page 9

60950). Following a power cut, the call in progress is lost.

Caution

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

2.5Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

2.6Precautions

•Do not allow the handset to come into contact with liquids or moisture.

•Do not open the handset, base station or charger.This could expose you to high voltages.

•Do not allow the charging contacts of the charger or the battery to come into contact with extraneous conductive materials.

•There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the USB socket and the phone line from the phone wall socket during a storm.

•Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing

aids may experience interference in the form of a humming noise.

•We advise that this phone should not be used near intensive care medical equipment, nor by persons with pacemakers.

•Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if placed too close. It is recommended that you position the base unit at least one meter from such appliances.

Caution

Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit. Base adapter:

Input: 100 V - 240 VAC 50/60 Hz

Output: 6 VDC 500 mA Charger adapter:

Input: 100 V - 240 VAC 50/60 Hz

Output: 6 VDC 210 mA

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM

The term “IC:” before the certification number signifies that Industry Canada technical specifications were met.This certification means that the equipment

Environment and safety

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SE450 US-EN Telephone Page Table of contents Advanced settings 10.1 Easy Call Personal settings11.3 Call Forward when Unanswered Network ServiceTechnical data Frequently asked Questions56 Busy Activation Codes 11.2.2Read and understand all instructions Important Safety InstructionsDamage to the product Important Safety InstructionsEnvironment and safety Battery requirementsTelephone connection Following a power cut, the call in progress is lost PrecautionsEnvironmental care Equipment Approval Information Notification to the Local Telephone CompanyRights of the Phone Company Environment and safety FCC RF Radiation Exposure Statement Hearing Aid CompatibilityPower requirements Electric, Magnetic and Electromagnetic Fields EMF Rbrc sealService Centers US service center Congratulations on your purchase and welcome to Philips Your phoneEarpiece Display Overview of your phone Event LEDSelect key o Back/Clear key cNumber keys Headset jack Battery doorMute key s Call transfer key & Intercom keyDisplay icons and Messages BackClear Overview of the base station Paging key a Page handset Long press to start registration procedureGetting started Getting startedInstall your phone Install batterySlide out the battery cover Charge battery IconTip Install optional headset Using multipacksDiameter 2.5 mm SE450 has five menus as shown in the following table Menu structureMenu Name PhonebookList of languages Enter date & time Clock and AlarmEnter PIN Advanced SettingsNetwork Services Using your phone Enter a Dialing Pause Call using Direct Access MemoryAnswer a call Handsfree answeringUse more of your phone Chain dialing Access phonebookStore a contact in the phonebook SelectModify a phonebook entry 1 Press m in idle mode Scroll n to Edit Entry and press o SelectView Delete all phonebook entries 1 Press m in idle mode Delete a phonebook entry 1 Press m in idle modeDirect Access Memory 7.1 Add/Edit Direct Access MemoryUsing the Redial list Delete Direct Access MemoryAccess Redial list Menu Scroll n to Delete and press o SelectAccess the Call log Using the Call logDelete a redial number Call waitingTo choose the format for call log display Display shows the caller informationSave call list entry into the phonebook Press o OKDelete a call list entry Using the IntercomPress o Menu Intercom another handset NoteBetween an internal or external call Answer an external call during intercomEstablish a three-party conference call Handset locatorSelect Scroll n to Alarm and press o Select Clock & Alarm, and press o SelectSet Date and Time Select Set Date/Time is highlighted. Press o SelectPersonal settings Set Alarm ToneSelect Handset Name is highlighted press o Select Set the Ring Tones Ring Tones and press o SelectSelect Scroll n to Language and press o Select Default setting for auto hang up is On Scroll n to Color Theme and press o SelectScroll n to Backlight Time and press o Select Advanced settings Advanced Set and press o SelectSet Easy Call number Auto Conference Set Call Barring ModeScroll n to Change PIN and press o Select XHD SoundPrompted to enter the current PIN again Confirm PIN will be displayedSelect Scroll n to Register and press o Select Reset UnitEasy registration UnregisterSet Area Code Scroll n to Reset and press oScroll n to Auto Prefix and press Press o OK to confirm Prefix is displayed on the screenChange the Dial Mode Change Flash timeAdvanced Set, and press o Select Network Service Default Settings Parameter Default ValueParameter Default Value Call Forward Call Forward, Call ForwardChange Call Forward Activation Codes Select Scroll n to Call Forward and press o SelectNetw. Services, and press o Select Call Forward when BusyCall Forward screen Busy, scroll to Deactivate and press o SelectChange Call Forward when Unanswered Activation Codes Call Forward when UnansweredCall Fwd Busy screen Select Scroll n to Call Fwd Unans and press o SelectAccess Voice Mail Change Call Forward when Unanswered Deactivation CodeVoice Mail Set Voice Mail NumberSelect Scroll n to Settings and press o Select Access Info ServiceAccess the Call Return Service Set Call Return Service NumberSelect Scroll n to Cancel Call BK and press o Select Call the Cancel Call Back NumberSet the Cancel Call Back Number Withhold IDTechnical data Connection Handset does not switch onHandset does not charge Communication is lost during a call Icon is not blinking during chargePhone is Out of range Set-up Searching... is displayed on handsetMy handset keeps going into idle mode Cannot change the settings of my voice mailHandset cannot be registered to the base station Caller number is not displayedIndex Index Set Info Service Number Set the Backlight Time UCZZ01978UZ0

SE4502B specifications

The Philips SE4502B is a standout model in the landscape of advanced healthcare technology, specifically designed for patient monitoring and diagnostic purposes. This device is equipped with a range of features that enhance its usability and functionality, making it an invaluable tool for healthcare professionals.

One of the primary features of the SE4502B is its high-resolution display. The bright, clear screen allows for easy visibility of critical patient data, even in low-light environments. This is crucial in emergencies where quick and accurate readings can make significant differences in patient outcomes.

The SE4502B is powered by state-of-the-art monitoring technologies that ensure real-time data collection and analysis. The device captures vital signs such as heart rate, blood pressure, respiratory rate, and temperature, all of which are essential for comprehensive patient assessments. The integration of advanced algorithms allows for precise measurements, minimizing errors and improving the reliability of the data collected.

Another notable aspect of the SE4502B is its connectivity options. The device is designed to seamlessly integrate with existing hospital systems, allowing for efficient data sharing and management. This connectivity not only boosts the operational efficiency of healthcare facilities but also supports telemedicine applications, broadening access to care for patients in remote locations.

Durability and ease of use are also key characteristics of the Philips SE4502B. The device is built to withstand the rigors of a clinical environment, ensuring longevity and consistent performance even under stress. Its user-friendly interface simplifies operation, allowing healthcare providers to focus more on patient care rather than navigating complex systems.

Moreover, the SE4502B includes customizable alerts and notifications, which help healthcare teams respond swiftly to changes in a patient’s condition. The ability to tailor these alerts based on individual patient needs enhances the overall quality of care.

In summary, the Philips SE4502B is a sophisticated and reliable device that combines advanced monitoring technologies with practical features tailored for real-world medical settings. Its high-resolution display, real-time monitoring, seamless connectivity, and durability make it an essential tool for healthcare providers dedicated to delivering high-quality patient care. The SE4502B is a testament to Philips’ commitment to innovation in healthcare technology, significantly improving patient monitoring and outcomes in clinical settings.
Top Page Image Contents