Philips SE4502B Select Scroll n to Register and press o Select, Easy registration, Unregister

Page 48

Note

By default, the PIN is 0000.

1On the base station, press and hold

afor 3 seconds.

Note

If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. If this

happens, repeat from Step 1.

2 On the handset, press m, scroll n to Advanced Set and press o

Select.

3 Scroll n to Register and press o Select.

4 Enter the PIN when prompted and press o OK to confirm.

Registering… is displayed on the screen.

• Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.

10.6.1Easy registration

1Insert the unregistered handset in the base station to automatically begin registration.

2Registering… is displayed on the screen.

•Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.

Note

The easy registration is possible only when PIN has not been changed and is still the default PIN 0000.

10.7Unregister

1Press m in idle mode, scroll n to Advanced Set and press o

Select.

2Scroll n to Unregister and press

oSelect.

3Enter the PIN when prompted and

press o OK to confirm.

4Scroll n to select the handset number to unregister and press o Select. Press o OK to confirm.

• A validation tone is emitted to

indicate successful unregistration.

Note

A registered handset other than one of the model described in this manual can only be unregistered using a handset described in this manual.

10.8Reset Unit

You can reset your phone to its default settings with this feature. (see 10.14 “Default Settings”)

Caution

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.

Note

You may have to configure your phone once again.

46

Advanced settings

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SE450 US-EN Telephone Page Table of contents Personal settings Advanced settings 10.1 Easy CallNetwork Service 11.3 Call Forward when UnansweredTechnical data Frequently asked Questions56 Busy Activation Codes 11.2.2Important Safety Instructions Read and understand all instructionsImportant Safety Instructions Damage to the productEnvironment and safety Battery requirementsTelephone connection Following a power cut, the call in progress is lost PrecautionsEnvironmental care Equipment Approval Information Notification to the Local Telephone CompanyRights of the Phone Company Environment and safety Hearing Aid Compatibility FCC RF Radiation Exposure StatementPower requirements Rbrc seal Electric, Magnetic and Electromagnetic Fields EMFService Centers US service center Your phone Congratulations on your purchase and welcome to PhilipsOverview of your phone Event LED Earpiece DisplaySelect key o Back/Clear key cHeadset jack Battery door Number keysMute key s Call transfer key & Intercom keyDisplay icons and Messages BackClear Long press to start registration procedure Overview of the base station Paging key a Page handsetGetting started Getting startedInstall your phone Install batterySlide out the battery cover Charge battery IconTip Install optional headset Using multipacksDiameter 2.5 mm Menu structure SE450 has five menus as shown in the following tableMenu Name PhonebookList of languages Clock and Alarm Enter date & timeAdvanced Settings Enter PINNetwork Services Using your phone Call using Direct Access Memory Enter a Dialing PauseAnswer a call Handsfree answeringUse more of your phone Access phonebook Chain dialingStore a contact in the phonebook SelectModify a phonebook entry 1 Press m in idle mode Scroll n to Edit Entry and press o SelectView Delete a phonebook entry 1 Press m in idle mode Delete all phonebook entries 1 Press m in idle modeDirect Access Memory 7.1 Add/Edit Direct Access MemoryDelete Direct Access Memory Using the Redial listAccess Redial list Menu Scroll n to Delete and press o SelectUsing the Call log Access the Call logDelete a redial number Call waitingDisplay shows the caller information To choose the format for call log displaySave call list entry into the phonebook Press o OKUsing the Intercom Delete a call list entryPress o Menu Intercom another handset NoteAnswer an external call during intercom Between an internal or external callEstablish a three-party conference call Handset locatorClock & Alarm, and press o Select Select Scroll n to Alarm and press o SelectSet Date and Time Select Set Date/Time is highlighted. Press o SelectPersonal settings Set Alarm ToneSelect Handset Name is highlighted press o Select Set the Ring Tones Ring Tones and press o SelectSelect Scroll n to Language and press o Select Default setting for auto hang up is On Scroll n to Color Theme and press o SelectScroll n to Backlight Time and press o Select Advanced settings Advanced Set and press o SelectSet Easy Call number Set Call Barring Mode Auto ConferenceXHD Sound Scroll n to Change PIN and press o SelectPrompted to enter the current PIN again Confirm PIN will be displayedReset Unit Select Scroll n to Register and press o SelectEasy registration UnregisterScroll n to Reset and press o Set Area CodeScroll n to Auto Prefix and press Press o OK to confirm Prefix is displayed on the screenChange the Dial Mode Change Flash timeAdvanced Set, and press o Select Network Service Default Settings Parameter Default ValueParameter Default Value Call Forward, Call Forward Call ForwardChange Call Forward Activation Codes Select Scroll n to Call Forward and press o SelectCall Forward when Busy Netw. Services, and press o SelectCall Forward screen Busy, scroll to Deactivate and press o SelectCall Forward when Unanswered Change Call Forward when Unanswered Activation CodesCall Fwd Busy screen Select Scroll n to Call Fwd Unans and press o SelectChange Call Forward when Unanswered Deactivation Code Access Voice MailVoice Mail Set Voice Mail NumberAccess Info Service Select Scroll n to Settings and press o SelectAccess the Call Return Service Set Call Return Service NumberCall the Cancel Call Back Number Select Scroll n to Cancel Call BK and press o SelectSet the Cancel Call Back Number Withhold IDTechnical data Connection Handset does not switch onHandset does not charge Icon is not blinking during charge Communication is lost during a callPhone is Out of range Set-up Searching... is displayed on handsetCannot change the settings of my voice mail My handset keeps going into idle modeHandset cannot be registered to the base station Caller number is not displayedIndex Index Set Info Service Number Set the Backlight Time UCZZ01978UZ0

SE4502B specifications

The Philips SE4502B is a standout model in the landscape of advanced healthcare technology, specifically designed for patient monitoring and diagnostic purposes. This device is equipped with a range of features that enhance its usability and functionality, making it an invaluable tool for healthcare professionals.

One of the primary features of the SE4502B is its high-resolution display. The bright, clear screen allows for easy visibility of critical patient data, even in low-light environments. This is crucial in emergencies where quick and accurate readings can make significant differences in patient outcomes.

The SE4502B is powered by state-of-the-art monitoring technologies that ensure real-time data collection and analysis. The device captures vital signs such as heart rate, blood pressure, respiratory rate, and temperature, all of which are essential for comprehensive patient assessments. The integration of advanced algorithms allows for precise measurements, minimizing errors and improving the reliability of the data collected.

Another notable aspect of the SE4502B is its connectivity options. The device is designed to seamlessly integrate with existing hospital systems, allowing for efficient data sharing and management. This connectivity not only boosts the operational efficiency of healthcare facilities but also supports telemedicine applications, broadening access to care for patients in remote locations.

Durability and ease of use are also key characteristics of the Philips SE4502B. The device is built to withstand the rigors of a clinical environment, ensuring longevity and consistent performance even under stress. Its user-friendly interface simplifies operation, allowing healthcare providers to focus more on patient care rather than navigating complex systems.

Moreover, the SE4502B includes customizable alerts and notifications, which help healthcare teams respond swiftly to changes in a patient’s condition. The ability to tailor these alerts based on individual patient needs enhances the overall quality of care.

In summary, the Philips SE4502B is a sophisticated and reliable device that combines advanced monitoring technologies with practical features tailored for real-world medical settings. Its high-resolution display, real-time monitoring, seamless connectivity, and durability make it an essential tool for healthcare providers dedicated to delivering high-quality patient care. The SE4502B is a testament to Philips’ commitment to innovation in healthcare technology, significantly improving patient monitoring and outcomes in clinical settings.
Top Page Image Contents