Philips SE765 user manual Remote access commands, Set the sound quality of the message

Press MENU.

Select [ANSWER MACHINE] > [SETTINGS] > [MSG QUALITY], then press [SELECT] to confirm.

Select the new setting, then press [SELECT] to confirm.

»» The settng is saved.

Note

•• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds.

Remote access commands

Key Function

1Repeat the current or listen to the previous message.

2Listen to messages.

3Skip to the next message.

6Delete the current message.

7Switch the answering machine on. (not available when you listen to the messages).

8Stop listening to the message.

9Switch the answering machine off. (not available when you listen to the messages).

Set the sound quality of the message

You can adjust the sound quality of the messages received from the answering machine.

1

2

3

Behavior of the LED display on the base station

The table below shows you the current status with different LED display behavior on the base station.

LED	Answering	Message status
display	machine
	status
No	Off	--
display
	On	No new message
	On	Steady on: 3 new
		messages;
		Flashing: message full
		with 3 new messages
	On	Message full
	On	Remote access/listen
		to messages from the
		handset

E n glish

EN 45