Philips D711, D721 manual With the handset, On-hook hands, Free operation, Ing with line seizure

3.1Outgoing call

Acall can be established with or without on-hook dialling. On-hook dialling is understood to consist of entering digits without seizing a line (the handset is on-hook and no dial tone can be heard). Here, you have a possibility of changing the telephone number because you have not yet sent the dialling information.

It is also possible to define the MSN to be used before dialling and to switch identification on or off. The latter is only possible, however, if this feature is available at the local connection.

Besides manual dialling, it goes without saying that stored telephone numbers from the call list, the telephone book or the redial memory can also be used, and these can also be combined (chained) and edited.

3.1.1

When you seize a line (A or ö), you can initiate dialling by manually ente- ring digits or by retrieving a stored telephone number. In this case, it is not possible to modify entered digits. Incorrect dialling as the result of an incor- rectly entered digit can only be corrected by B or t, i.e. the connection is cancelled.

It is only possible to change the MSN to be used (see 3.1.3) or to switch over the identification (see 3.1.4) before dialling the first digit.

Initial state: idle

Steps:

No.	Description	Input	Display
1	Lift the handset
		A	MSN1: PRIVATE
			§
			ŋǤ‰ÏÌÓÛı

or

With the handset	ö	MSN1: PRIVATE
on-hook (hands		§

free operation) ŋǤ‰ÏÌÓÛı

2 If necessary, change s} MSN ˜1…8·:§ the MSN (see 3.1.3)

ŋǤ‰ÏÌÓÛı

16

ing (with line seizure)