Datalogic Scanning Pegaso manual Final Assembly, Ram Ball Assembly

Ram Ball Mounting Assembly

Figure 8. Ram Ball Assembly

Ram Balls	Adjustment
	Knob
	Screws

3.Use four screws (customer supplied) to secure one of the Ram balls to the desired mounting surface. Set the other Ram ball aside to use later in the assembly process.

4.Re-attach the Ram Ball Assembly to the Ram Ball you just affixed to the mounting surface.

Final Assembly

1.Insert the Ram Ball, mounted to the rear of the Mobile Dock assembly, into the Ram Ball assembly you earlier affixed to the mounting surface (see Figure 9). Tighten the adjustment knob to secure the Ram Ball in place.

Installation Guide 13