Datalogic Scanning Pegaso manual Battery Charging, COM Port Connection

Power and Peripheral Device Connections

Also refer to “Electrical Considerations” starting on page 5 for complete infor- mation and wiring diagrams detailing power connection.

For non-mobile applications, an AC power supply adapter is available to power the PMD. See “Accessories and Peripherals” on page 23. Contact your local distributor or Datalogic sales for additional information.

Battery Charging

The PMD provides battery charging for the Pegaso PDA when powered.

The Pegaso will charge its installed battery when power is applied to the Powered Mobile Dock.

COM Port Connection

The PMD includes a powered DTE serial port connection to allow the Pegaso PDA to communicate with peripherals, such as a handheld scanner or a porta- ble printer. +5v is available on pin 9 of the port connector for power to a peripheral.

Some peripherals may not follow all of the specifications for RS-232 hardware flow control. These will require additional or special considerations when used with the dock. See Table 2 for COM port pinouts.

Table 2. COM port DB9M Pinouts

Pin No.	Signal
1	DCD
2	RXD
3	TXD	Tied
4	DTR
5	GND
6	DSR
7	RTS
8	CTS
9	+5 @ 500Ma

18 Pegaso™ Powered Mobile Dock