Datalogic Scanning manual Inserting/Removing the Pegaso, Inserting the Pegaso in the Dock

Mounting Options

Figure 9. Installing the Mobile Dock Assembly on the Mount

Ram Ball
Ram Ball	Adjustment
Assembly	Knob

2.Loosen the Adjustment Knob slightly to tilt the Mobile Dock to the desired mounting angle. Re-tighten the Adjustment Knob securely.

3.Route and connect all cables (see “Power and Peripheral Device Connec- tions” starting on page 17 for more on connections). If you haven’t already prepared the power connection, reference “Electrical Consider- ations” starting on page 5 for wiring information.

Inserting/Removing the Pegaso

Inserting the Pegaso in the Dock

To insert a Pegaso into the Powered Mobile Dock, perform the following steps:

1.Slide the Pegaso into the Powered Mobile Dock.

2.Push gently downwards to insert the Pegaso until it is firmly seated in the Dock.

14 Pegaso™ Powered Mobile Dock