Datalogic Scanning Pegaso manual Electrical Accessories, Electrical Accessory Matrix

Page 13

Electrical Accessories

Electrical Accessories

Installation of the PMD may require accessory electronic equipment for proper and safe operation. Some of this equipment may not be available through Datalogic, but could be available through your dealer, forklift parts provider, or other suppliers. See Appendix A, “Accessories and Peripherals” on page 23.

DC/DC Converter. Voltage step down device used to power the PDA from +24, +36 and +48 volt battery systems.

DC Conditioner/UPS. Used to provide backup DC power during sags or interruptions in battery voltage due to peak loads or disconnect.

Delay Timer. Provides automatic shut-off of power to a PDA or other equip- ment, to reduce battery drain.

Noise Spike/RF Filter. Used to suppress high voltage and RF voltage spikes on the power system.

Electrical Accessory Matrix

Table 1 summarizes the accessory recommendations and options available depending on the forklift voltage application. This matrix should be used only as a reference and may not include accessories for all applications.

Table 1. Electrical Accessories

 

 

Forklift System Voltage

 

Accessory

 

 

 

 

12 volt

24 volt

36 volt

48 volt

 

 

 

 

 

 

DC/DC Converter

Not Required

Required

Required

Required

 

 

 

 

 

DC Conditioner/UPS

Optional*

Not Required

Not Required

Not Required

 

 

 

 

 

Delay Timer

Optional*

Optional*

N/A

N/A

 

 

 

 

 

Noise Spike/RF Filter

Recommended

Recommended

Recommended

Recommended

 

 

 

 

 

5-Amp Dock In-Line Fuse

Required

Required

Required

Required

 

 

 

 

 

*Ensure that the device being installed is properly rated for use on your mobile platform.

Installation Guide

7

Image 13
Contents Pegaso Datalogic Mobile, Inc Table of Contents Appendix. Accessories and Peripherals Datalogic Pegaso Powered Mobile Dock Warranty Safety Precautions Manual Overview IntroductionDocument Conventions Features of the Powered Mobile Dock About the Powered Mobile DockUnpacking Electrical SpecificationsIntroduction Electrostatic Build-up Electrical ConsiderationsGround Contact Anti-Static Straps Installing Ground Contact Anti-Static StrapsElectrical Accessory Matrix Electrical AccessoriesConnection to +12V Electrical System ConnectionsDC/DC Connection to +24V, +36V and +48V SystemsElectrical Considerations Mounting Options Ram Ball Mounting AssemblyComponents, Materials and Tools Ram Ball Assembly sold separatelyAttaching the Ram Ball to the Mobile Dock Ram Ball Assembly Final AssemblyInserting the Pegaso in the Dock Inserting/Removing the PegasoRemoving the Pegaso from the Dock Inserting the Pegaso into the Powered Mobile DockRemoval of the Pegaso from the Dock is complete Power Connection Power and Peripheral Device ConnectionsConnections on the Dock COM Port Connection Battery ChargingUSB Connection Power and Peripheral Device Connections Hardware Troubleshooting Appendix a TroubleshootingTechnical Support Troubleshooting Overview Appendix B Accessories and PeripheralsAccessories and Peripherals Overview Accessories and Peripherals Index Unpacking Warranty Page Datalogic Mobile, Inc