Casio IT-2000 Operation Method, File Upload, Specifying Files from PC, Operation on PC

3.Operation Method

After connecting the necessary system devices and installing the software on the PC, perform file upload/download with the following procedure. On this system each function will be executed if the IT-2000, which has started up the FLINK Utility, is mounted on the I/O Box after the PC-side utility was started up. Each function can also be executed by initiating the PC-side utility after mounting the IT-2000, which has started up the FLINK Utility, on the I/O Box.

3.1File Upload

Transfer files from the IT-2000 to the PC. There are two methods for specifying the files to be uploaded: specifying files from the PC, and specifying files from the IT-2000.

3.1.1Specifying Files from PC

Operation on PC

Start up the Upload/Download Utility on the PC and select "Command" from the "Execute" menu to display the Command Screen.

Set the Command field to "Receive".

￿In the "File(s)" field specify the name of the objective file on the PC by its full path name.

In the "Destination Dir" field specify the directory by its full path name on the PC in which the transmitted file is to be stored.

Fig. 3.1 Command Screen

15