Unitech manual First Operation of the Unitech PA962

Protective Screen Film

The PA962 screen ships with a protective plastic film. You may remove this if desired by peeling from one corner. The screen will be more susceptible to scratching without the film, but will be more readable.

First Operation of the Unitech PA962

Pressing the ON/OFF Key

The Unitech PA962 welcome screen appears. The

Windows CE® screen will appear shortly thereafter.

Adjusting Screen Brightness

Press [FUNC] key and Cursor key to decrease or increase screen brightness.

Calibrating the PA962

This screen will automatically appear when the unit is powered-on for the first time or after the system is reset. This screen can also be ac- cessed at any time by pressing the hot key [FUNC] and the [ESC] key.

The PA962 will prompt you to calibrate the unit by tapping a sequence of screen locations. Tap gently but firmly. When you have completed the series of taps, press the [ENT] key to confirm it or press the [ESC] key to cancel it.

Setting Time Zone, Date, and Time

After Calibrating the PA962, the “Date/Time Prop- erties” dialog box will appear. Follow the steps below to set the date and time.

Product Reference Guide 11