Automatically turn off the backlight when using battery power:
Tap the check box to toggle this function. Available idle times are: 15 and 30 seconds, and 1, 2, and 5 minutes.
Automatically turn off the backlight when using external power:
Tap the check box to toggle this function. Available idle times are: 15 and 30 seconds, and 1, 2, 5, 10, 15, and 30 minutes.
Automatically turn on the backlight when key
This function is only activated by the PA962’s keypad rather than the Windows CE keyboard.
Warm Boot / Cold Boot
Warm Boot
=To perform a warm boot while the PA962 is operating, insert a pin (paper clip works well) into the reset hole on the back of the terminal, right below the PCMCIA cover.
=Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and confirm the warning message.
WARNING: Warm Boot will cause unsaved data to be lost.
Cold Boot
Press the coldboot buttom underneith the
PCMCIA cover, the terminal will perofrm coldboot.
NOTE: Cold Boot will cause the PA962 to return to its original factory settings.
22 | Unitech PA962 |