Using the Pocket PC | 2 |
|
|
To select writing
1.Tap and hold the stylus next to the text you want to select until the insertion point appears.
2.Without lifting, drag the stylus across the text you want to select.
If you accidentally write on the screen, tap Tools and then Undo and try again. You can also select text by tapping the Pen button to deselect it and then dragging the stylus across the screen.
You can cut, copy, and paste written text in the same way you work with typed text: tap and hold the selected words and then choose an editing command on the
Tips for getting good recognition
•Write neatly.
•Write on the lines and draw descenders below the line. Write the cross of the “t” and apostrophes below the top line so that they are not confused with the word above. Write periods and commas above the line.
•For better recognition, try increasing the zoom level to 300% using the Tools menu.
•Write the letters of a word closely and leave big gaps between words so that the Pocket PC can easily tell where words begin and end.
•Hyphenated words, foreign words that use special characters such as accents, and some punctuation cannot be converted.
•If you add writing to a word to change it (such as changing a “3” to an “8”) after you attempt to recognize the word, the writing you add will not be included if you attempt to recognize the writing again.