LG Electronics IP LDK-20 installation manual Closing the front cover

IP LDK-20 Installation Manual KSU Installation

2.2.4.2 Closing the front cover

Insert the front cover into the slot on the KSU as show in Figure 2.2.4.2.

Then put the front cover down on the KSU in the direction of the arrow, as shown.

Turn the screws clockwise to tighten, as in the Figure.

Figure 2.2.4.2 Closing the front cover

※NOTE

For safety reasons, close the front cover and tighten the screws prior to operating the IP LDK-20 System.

13