LG Electronics IP LDK-20 installation manual Numbering Plan Type PGM, Number Plan Type, Range

IPLDK-20 Installation Manual Starting the IP LDK-20 System

6.2.3.3 Numbering Plan Type (PGM 104)

PROCEDURE

1.Press [Trans/PGM] + 104, then enter the Number Plan Type (Refer to following Table, press 1 digit). Press [HOLD/SAVE] to accept change.

Number Plan Type

	NUMBER SET TYPE /		INTERCOM		DEFAULT	REMARK
	PRESS #		RANGE
1		10		– 37	Yes	As the basic type, the 1st digit of station number
						should be 1 – 4.
2		10		– 37	No	The station number can be changed within 79.
3		10		– 37	No
4		700		– 727	No
5		200		– 227	No
6		10		– 37	No
7		100		– 137	No
8		10		– 37	No	The station number can be changed within 99.

71