IP | Board Installation |
|
|
3.3.2STIB (Basic Rate Interface Board: Selectable S/T interface)
Description
STIB should be installed on the LCOB/STIB/CBIB connector, and supports
Figure 3.3.2 STIB
S/T Interface selection on BRI1 (Port 1): Default = T Interface
-SW2 : Default = all OFF position
-SW4 : Default = 1, 2 pins ON position and 3, 4 pins OFF position
BRI2(Port 2): Default = T Interface only.
- SW1: Default = ON position
32