Useful Telephone Settings
Guide to handset settings
To customise the handset (general approach):
1{j/OK}
2Press {v} or {e} to select “SETTING HS”. i{>}
3Press {v} or {e} to select the desired item in the handset settings menu. i{>}
4Press {v} or {e} to select the desired item in the
5Press {v} or {e} to select the desired setting. i{>}
L This step may vary depending on the feature being programmed. L To exit the operation, press {ih}.
Note:
L In the following table, < > indicates the default settings.
Menu |
| Page |
TIME ALARM | SET TIME | 14 |
| SET ALARM <OFF> | — |
RINGER OPT | RINGER VOL <level 6> | — |
| EXT RINGER*1 <RING TYPE 1> | — |
| INT RINGER <RING TYPE 1> | — |
| PAGING <RING TYPE 1> | — |
| ALARM <RING TYPE 1> | — |
TONE OPT | KEY TONE <ON> | — |
| CALL WAITING <ON> | — |
| RANGE ALARM <OFF> | — |
| BATTERY LOW <ON> | — |
Menu | Page | |
DISPLAY OPT | STANDBY MODE <CLOCK> | — |
| TALK MODE <TALK TIME> | — |
| LANGUAGE <ENGLISH> | 10 |
CALL OPT | CALL BAR <OFF> | 15 |
| DIRECT NO | 15 |
| SET DIRECT <OFF> | — |
OTHER OPT | HSPIN CHANGE <0000> | 15 |
| AUTO TALK*2 <OFF> | — |
RESET HS | — | 15 |
*1 If you select a melody for the external ringer tone, the ringer continues to sound until the melody finishes even when another person answers the call using another phone connected to the same line. If you want the handsets to stop ringing at the same time, select ringer tone number 1.
*2 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
Alarm
An alarm sounds at the set time for 3 minutes.
Important:
L Set the date and time beforehand (page 10).
1{j/OK}
2{v}/{e}: “SETTING HS” i{>}
3{v}/{e}: “TIME ALARM” i{>}
4{v}/{e}: “SET TIME” i{>}
14