Panasonic KX-TG1805NZ Ringer setup, Night mode, Ringer volume, Changing ringtones

Handset Settings

Ringer setup

Ringer volume

1Press {j/OK}.

2Select “Handset Setup”, then press {>}.

3Select “Ringer Setup”, then press {>}.

4Select “Ringer Volume”, then press {>}.

5Press {e} or {v} repeatedly to select the desired volume.

6Press {>}.

7Press {ih}.

Note:

LThe handset will ring for intercom calls and when paged even if the ringer is turned off.

Changing ringtones

You can change the ringtone used by the handset.

“Ext. Ringtone”: Selects the ringtone for outside calls.

“Int. Ringtone”: Selects the ringtone for intercom calls.

1Press {j/OK}.

2Select “Handset Setup”, then press {>}.

3Select “Ringer Setup”, then press {>}.

4Select the desired item, then press {>}.

5Select the desired ringtone, then press {>}.

6Press {ih}.

Night mode

Night mode allows you to select a block of time during which the handset will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset and the base unit (page 22).

Set the date and time beforehand (page 9).

Setting the start and end time for night mode

1Press {j/OK}.

2Select “Handset Setup”, then press {>}.

3Select “Ringer Setup”, then press {>}.

4Select “Night Mode”, then press {>}.

5Select “Start/End”, then press {>}.

6Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

7Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

8Press {j/OK}.

9Press {ih}.

Turning night mode on/off

1Press {j/OK}.

2Select “Handset Setup”, then press {>}.

3Select “Ringer Setup”, then press {>}.

17