Panasonic KX-TG1805NZ operating instructions Ringer setup, Night mode

Page 22

Base Unit Settings

Ringer setup

Ringer volume

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

25).

4Select “Ringer Setup”, then press {>}.

5Select “Ringer Volume”, then press {>}.

6Press {e} or {v} repeatedly to select the desired volume.

7Press {>}.

8Press {ih}.

Night mode

Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 17) and the base unit.

Set the date and time beforehand (page 9).

Setting the start and end time for night mode

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

25).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “Start/End”, then press {>}.

7Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

8Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.

LIf you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time.

9Press {j/OK}.

10Press {ih}.

Turning night mode on/off

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

25).

4Select “Ringer Setup”, then press {>}.

5Select “Night Mode”, then press {>}.

6Select “On/Off”, then press {>}.

7Select “On” or “Off”, then press {>}.

8Press {ih}.

Setting the ring delay for night mode

This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring, useful when someone urgently needs to speak with you. If you select “No Ringing”, the base unit will not ring during night mode.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model No. KX-TG1805NZ Introduction Making/Answering Calls Included accessories Accessory informationAdditional/replacement accessories General Battery cautionImportant information EnvironmentHandset Charge contact Phonebook Talk Navigator key Controls and displaysControls Base unit Charge contactDisplay icons ConnectionsDisplays Display Meaning IconBattery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making callsOther features Answering callsTo adjust the ringer volume when an outside call comes Auto talk featureHandset locator Finding and calling a phonebook entry Using the phonebookAdding entries to the phonebook Editing entries in the phonebookChain dial Guide to handset settings Handset settings Sub-menu Default setting MenuRinger volume Ringer setupNight mode Changing ringtonesCall options Display setupSelecting the standby mode display Changing the display contrast Turning auto talk on/off Resetting the handset to its default settings Other options Changing the handset PIN Personal Identification NumberHandset Settings Guide to base unit settings Base unit Sub-menu Default setting Settings menuNight mode Changing the recall time Setting pause lengthStoring/changing emergency numbers Setting call restriction Selecting area codes to be deleted automaticallyResetting the base unit to its default settings Changing the base unit PIN Personal Identification NumberCaller list Using Caller ID serviceViewing the caller list and calling back Erasing caller information Call minderEditing a caller’s phone number before calling back Storing caller information into the phonebookAdditional handsets Operating additional unitsRegistering a handset to a base unit Manual registrationTurning the repeater mode on/off Cancelling a handsetCancelling a base unit Increasing the range of the base unitTransferring calls between handsets Intercom between handsetsHandset Wall mounting 60 mm Screws HooksAvailable character entries Character entry modesExtended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Useful Information Specifications Index PINPage Customer Support Centre Tel. No 272 Sales Department Copyright
Top Page Image Contents