Panasonic KX-TG1702NZ Multi-unit Operation KX-TG1702, Intercom between handsets, Handset

Page 16

Multi-unit Operation (KX-TG1702)

Intercom between handsets

Intercom calls can be made between handsets.

Example: When handset 1 calls handset 2

1Handset 1:

Press and hold [INT] until “ ” shows on the display. Press [2] (desired handset number).

2Handset 2:

Press [ ] to answer.

3When finished talking, press [ ].

Note:

• If phonebook is shown when you press [INT], press [C], then press and hold [INT].

Switching calls between outside call and intercom with a handset

Example: When handset 1 switches between an outside call and handset 2

1Handset 1:

During an outside call, press and hold

[INT] until “ ” shows on the display. Press [2] (desired handset number).

The outside call will be put on hold. If there is no answer, press [ ] to

return to the outside call.

2 Handset 2:

Press [ ] to answer the call.

Handset 2 can talk with handset 1.

3 Handset 1:

Press and hold [INT] to return to the outside call.

Handset 2:

Press [ ] to end the call.

Transferring an outside call to handsets

Example: When handset 1 transfers an outside call to handset 2

1Handset 1:

During an outside call, press and hold

[INT] until “ ” shows on the display. Press [2] (desired handset number).

The outside call will be put on hold. If there is no answer, press [ ] to

return to the outside call.

2 Handset 2:

Press [ ] to answer the call.

Handset 2 can talk with handset 1.

3 Handset 1:

Press [ ] to transfer the outside call to handset 2.

Note:

The external call can only be transferred when the intercom is established successfully.

Conference call with an outside call and a handset

Example: When handset 1 talks with an outside call and handset 2

1Handset 1:

During an outside call, press and hold [INT] until “ ” shows on the display.

Press [2] (desired handset number).

The outside call will be put on hold. If there is no answer, press [ ] to

return to the outside call.

2 Handset 2:

Press [ ] to answer the call.

Handset 2 can talk with handset 1.

3 Handset 1:

Press [ ] to establish a conference call with the outside call and handset 2.

16

Image 16
Contents Table of Contents You must subscribe to Caller ID service to use this featureDigital Cordless Phone Model No. KX-TG1701NZ Introduction Your phoneIncluded accessories Quantity Accessory itemsBattery caution PreparationImportant information GeneralGeneral warnings Important noticePreparation ConnectionsBattery installation Battery chargeBattery strength Panasonic Ni-MH battery performanceControls HandsetBase unit Charger KX-TG1702Symbols used in these operating instructions Symbol MeaningDisplays Icons MeaningUseful Telephone Settings Guide to telephone settingsDate and time 24-hour display formatHandset ringer volume Setting PINResetting to default settings Handset key tone On/OffPause button for PBX/long distance service users Making / Answering CallsMaking calls Answering callsMaking / Answering Calls RediallingPhonebook Adding entries to the phonebookMaking calls Editing numbersCaller ID Service Using Caller ID serviceMulti-unit Operation KX-TG1702 Intercom between handsetsTransferring an outside call to handsets Conference call with an outside call and a handsetTroubleshooting Useful InformationProblem Cause & Solution Useful InformationHandset registration SpecificationsWall mounting Customer Support Centre Tel. No 272 Sales Department Copyright