Useful Information
Handset registration
The included handset and base unit are preregistered. If 
is not shown on the handset display when the unit is turned on, the handset is not registered to the base unit. Register the handset.
1Base unit:
Press and hold page button [
] for
about 10 seconds to go to registration mode.
•If all registered handsets start ringing in step 1, press [
] to stop and try
again.
2Handset:
[ 
/OK] > [ 
] > Input PIN (factory
setting “0000”, page 11) > [ 
/OK]
•
•Handset will search base unit for registration.
•When the registration is completed, 
lights and a beep sounds.
Specifications
•Number of channels: 120 Duplex Channels
•Frequency range: 1.88 GHz to 1.9 GHz
•Duplex procedure: TDMA (Time Division Multiple Access)
•Channel spacing: 1,728 kHz
•Bit rate: 1,152 kbit/s
•Modulation: GFSK (Gaussian Frequency Shift Keying)
•RF transmission power: Approx. 250mW
•Power source:
•Voice coding: ADPCM 32 kbit/s
•Power consumption: Base unit:
Standby: Approx. 3.5 W
Maximum: Approx. 9.2 W Charger*1:
Standby: Approx. 0.6 W
Maximum: Approx. 5.0 W
•Operating conditions: 5
•Dimensions:
Base unit: Approx. 47 mm × 116 mm × 107 mm
Handset: Approx. 142 mm × 34 mm × 47 mm
Charger*1: Approx. 45 mm × 88 mm × 79 mm
•Mass (weight):
Base unit: Approx. 120 g
Handset: Approx. 120 g
Charger*1*2: Approx. 300 g
*1
*2 Includes the AC adaptor.
Note:
•Specifications are subject to change.
•The illustrations used in these operating instructions may differ slightly from the actual product.
Wall mounting
Base unit
70 mm
Screws
19