Useful Information

		Useful Information

Problem		Cause & Solution

Noise is heard during a call.		• You are using the handset or base unit in an
		area with high electrical interference. Place
		the handset and base unit away from
		interference sources, such as antennas and
		mobile phones.

Pressing [	] does not display/	• The redialled number was more than 20
dial the last number dialled.		digits long. Redial the number manually.

I tried to charge the batteries, but		• Make sure the charge contacts are not dirty
they do not charge at all.		and the AC adaptor is connected properly,
		then try again.

I charged the batteries for 10		• Clean the charge contacts and charge again
hours, but	still flashes.	(page 7,8).
		• It is time to replace the batteries (page 6).

I charged the batteries for 10		• Wipe the battery ends (+, –) and the unit
hours, but the operating time		contacts with a dry cloth.
seems to be short.

Caller information is not displayed.		• You must subscribe to Caller ID service.
		• Your unit is connected to a telephone line with
		DSL service. We recommend connecting a
		filter (contact your DSL service provider) to the
		telephone line between the base unit and the
		telephone line jack.
		• When you answer the calls, the caller
		information will not be left in the call log.

I reset the handset but a long beep		• Reset has failed. Please try again (page 11).
is heard and the display returns to
telephone setting mode.

I found the numbers stored in the		• If you reset to default, the numbers in the
phonebook and in the redial list		phonebook and redial list are cleared.
are cleared.

I cannot enter the PIN.		• If you have changed PIN but forgot it, please
		contact your nearest Panasonic Service
		Centre for help.

-CALL- is displayed.		• Caller information has been received (page 15).

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333

Problem