Panasonic KX-TG1850ALT Receiving a message, Sending a saved message, Erasing saved messages

TG1850AL(e).book Page 37 Monday, December 6, 2004 9:10 PM

SMS (Short Message Service)

L“Invalid Number” is displayed if you try to send a message to a phone number saved in the phonebook, caller list, or redial list that is over 20 digits long.

LWhen sending a message, “Sending Message” is displayed momentarily, then “Transferring Message” is displayed.

LIf your phone is connected to a PBX, store the PBX line access number (page 40).

Sending a saved message

1Press $(middle soft key).

2Select X, then press ,.

3To access the public mailbox Select “Public”, then press ,.

To access a private mailbox

Select the desired mailbox, press ,, then enter its password.

4Select “Send List”, then press ,.

5To read a saved message, press {e} or {v} repeatedly to select the message, then press ,.

LMessages are displayed in chronological order and by destination phone number.

6To send the message, press $, select “Send”, then press ,.

7Press and hold {C/T} to erase all numbers, then continue from step 6, “Writing and sending a new message”, page 36.

Editing and sending a saved message

1Press $(middle soft key).

2Select X, then press ,.

3To access the public mailbox Select “Public”, then press ,.

To access a private mailbox

Select the desired mailbox, press ,, then enter its password.

4Select “Send List”, then press ,.

5Press {e} or {v} repeatedly to select the message, then press ,.

6Press $, select “Edit Message”, press ,, then continue from step 5, “Writing and sending a new message”, page 36.

Erasing saved messages

1Press $(middle soft key).

2Select X, then press ,.

3To access the public mailbox Select “Public”, then press ,.

To access a private mailbox

Select the desired mailbox, press ,, then enter its password.

4Select “Send List”, then press ,.

5Press {e} or {v} repeatedly to select the message, then press ,.

6Press $, select “Erase”, then press

,.

LTo erase all messages in the selected mailbox, select “Erase All”, then press ,.

7Select “Yes”, then press ,.

8Press {ih}.

Receiving a message

When an SMS message is received:

–a tone is heard (if the ringer is turned off, this tone is not heard)

–“Receiving SMS Message” is displayed

–his displayed

–the total number of new (unread) SMS messages is displayed next to hif the screen saver (page 13) is turned off

37