Panasonic KX-TG1850ALT operating instructions Reading a received message, Replying to a message

TG1850AL(e).book Page 38 Monday, December 6, 2004 9:10 PM

SMS (Short Message Service)

Reading a received message

1Press $(middle soft key).

2Select X, then press ,.

3To access the public mailbox Select “Public”, then press ,.

To access a private mailbox

Select the desired mailbox, press ,, then enter its password.

LIf a mailbox contains new (unread) SMS messages, @ is displayed next to the total number of messages for that mailbox.

4Select “Receive List”, then press

,.

5Press {e} or {v} repeatedly to select a message.

LMessages which have already been read are indicated by a Q, even if they were read using another handset.

LTo erase a message, press w, select “Yes”, then press ,.

6Press ,to read the message content.

Note:

LTo call the message sender, press {C} or {s}.

LIf “SMS Full” is displayed, new SMS messages cannot be received. Erase unnecessary messages (page 37, 38).

LIf you receive a message from a party saved in the phonebook, the stored name is displayed.

LSome SMS service providers attach a 1- digit number to the message sender’s phone number, and sender names stored in the phonebook may not be displayed as a result.

Replying to a message

1While reading a received message, press $(middle soft key).

2Select “Reply”, then press ,.

3Enter a message (page 41), then press

,.

4Edit the destination phone number and/or press ,.

5Continue from step 7, “Writing and sending a new message”, page 36.

Editing/forwarding a message

1While reading a received message, press $(middle soft key).

2Select “Edit Message”, then press

,.

3Continue from step 5, “Writing and sending a new message”, page 36.

Erasing received messages

1While reading a received message, press $(middle soft key).

2Select “Erase”, then press ,.

LTo erase all messages in the selected mailbox, select “Erase All”, then press ,.

3Select “Yes”, then press ,.

4Press {ih}.

Storing the sender’s number in the phonebook

1While reading a received message, press $(middle soft key).

2Select “Add Phonebook”, then press

,.

3Continue from step 3, “Adding entries to the phonebook”, page 18.

Editing the sender’s number before calling back

1While reading a received message, press $(middle soft key).

38