Panasonic KX-TG1831NZ Base unit settings, Call Options Recall/Flash, Repeater Mode

Base Unit Settings

Base unit settings

LUse the handset to customise the base unit.

LWhen customising the base unit, the current item or setting is indicated by >.

To customise the base unit:

1{j/OK}

2Press {^} or {V} to select “Base Unit Setup”. i{>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i{>}

4Press {^} or {V} to select the desired item in the sub-menu. i{>}

5Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the “Feature” column of the chart.

LTo exit the operation, press {ih}.

Base unit settings	Sub-menu	Feature (default setting)
menu
Ringer Volume	—	Base unit ringer volume (Medium)
Call Options	Recall/Flash	Change the recall time (“600 msec.”).*1
	Area Code	page 18
	Call Restrict	page 18
Other Options	Base Unit PIN	Change base unit PIN (“0000”).*2
		– Enter the current 4-digit base unit PIN.
		iEnter the new 4-digit base unit PIN.
		i{j/OK}
	Repeater Mode	(“Off”): page 22

*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

17