Panasonic KX-TG6052AL, KX-TG6053AL Alarm, Customer support, Set the date and time beforehand

Page 29

Programming

by having the recall time set at 100 ms, and then follow your service provider/ telephone company “Call Waiting” instructions to operate this service.

*6 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.

*7 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.

Alarm

An alarm will sound once for 3 minutes at the set time.

Set the date and time beforehand (page 14).

1{MENU} i{8}

2{V}/{^}: “Once” i{Select}

L To turn off the alarm, select “Off”. i{Select} i{OFF}

3Set the desired date and time. i{Save}

4{V}/{^}: Select the desired ringer tone. i{Save}

L We recommend selecting a different ringer tone from outside call.

5{OFF}

Note:

LTo stop the alarm, press any dial key or place the handset on the base unit or charger.

LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.

Customer support

The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer. {MENU} i{V}/{^}: “Customer support” i{Select} i{OFF}

29

Image 29

Contents Model No. KX-TG6051AL Operating InstructionsModel No. KX-TG6052AL Model No. KX-TG6053ALMaking/Answering Calls Product information Special features Notable feature differences among the following modelsNHandset voice enhancer NTalking Caller IDIncluded accessories Accessory informationAdditional/replacement accessories Accessory item Quantity KX-TG6051 KX-TG6052 KX-TG6053Important safety instructions Medical InstallationBattery For best performance Routine care EnvironmentSetting up the handset Setting up the base unitConnecting the AC adaptor and telephone line cord Connecting the AC adaptorBattery charge Battery installation/ replacementBase unit Charger Available modelSymbols used in these operating instructions Handset ControlsBase unit Date and time Setting the unit before useDisplay Adjusting the receiver/speaker volume Using the speakerphoneMaking calls Erasing a number in the redial listAnswering calls Useful features during a callHold button Mute buttonHandset clarity booster Recall buttonHandset voice enhancer Slow TalkCall share Finding and calling a phonebook item Handset phonebookAdding items to the phonebook Copying handset phonebook items Talking Caller ID Using Caller ID serviceCall waiting and Caller ID compatible Select Ringer ID/Light-up IDViewing the caller list and calling back Caller listStoring your area code Editing a caller’s phone number before calling backErasing selected caller information Storing caller information into the phonebookSave Save OFFProgramming by scrolling through the display menus Programmable settingsMenu OFF Main menu Sub-menuRegistration HS registration Deregistration Main menu Sub-menuFeature Setting code System Code Programming using the direct commands7Melody Ringer volume Set the date and time beforehand AlarmCustomer support Turning the answering system on/off Answering systemMemory capacity Screening callsGreeting message Listening to messages using the base unitVoice guidance Listening to messages using the handsetCalling back Caller ID subscribers only EraseRemote commands Using the answering system remotelyKey Remote command Remote operationTurning on the answering system remotely Answering system settingsSkipping the greeting message to leave a message Remote codeMessage alert Caller’s recording timeStoring the Voice Mail VM access number Using Voice Mail serviceTo erase the Voice Mail access number Listening to Voice Mail messagesVoice Mail Service Handset locator IntercomMaking an intercom call Answering an intercom callTransfer Transferring calls between handsets, conference callsTo complete the transfer Press OFF To establish a conference call Press ConfWall mount template for the base unit Wall mountingLanyard/strap eyelet Headset optionalCharger Wall mount template for the chargerDisplay message Cause/solution Error messagesProgrammable settings Problem Cause/solution TroubleshootingGeneral use Problem Cause/solution Making/answering calls, intercom Problem Cause/solutionBattery recharge Problem Cause/solution Caller ID Problem Cause/solution Answering system Problem Cause/solution Handset Menu Registration Problem Cause/solutionInstructions to customer Service difficulties Mass Weight Approx g Power consumption SpecificationsDepth 144 mm Depth 33 mmIndex Copyright Attach your purchase receipt hereSales Department Panasonic Australia Pty. Limited