TG5921AL_5922AL.book Page 29 Friday, February 24, 2006 3:42 PM
Programming
Programmable settings
You can customise the unit by programming the following features using the handset. To access the features, there are 2 methods: scrolling through the display menus (page 29) or using the direct commands (page 31).
LMainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
2
{MENU}
Press {^} or {V} to select the desired menu. i{Select}
LIf there is a
Press {^} or {V} to select “Ringer setting”. i{Select} Then press {^} or {V} to select “Ringer tone”. i{Select}
3 Press {^} or {V} to select the desired setting.
LThis step may vary depending on the feature being programmed.
4 {Save} i{OFF}
Main menu |
| Page | |
V.M. access | – | – | page 33 |
Ringer setting | Ringer volume | – | – |
| Ringer tone | – | – |
| Ring colour | – | – |
Voice enhancer | – | – | – |
Copy phonebook*1 | Copy 1 item | – | page 24 |
| Copy all items | – | page 24 |
29