Panasonic KX-TG9321T, KX-TG9322 operating instructions Battery recharge Problem Cause/solution

Useful Information

Problem	Cause/solution
I cannot register a handset	L The maximum number of handsets (6) is already
to a base unit.	registered to the base unit. Cancel unused
	handset registrations from the base unit (page 29).
Battery recharge
Problem	Cause/solution
The handset beeps and/or L Battery charge is low. Fully charge the batteries
3flashes.	(page 10).
I fully charged the	L Clean the battery ends (S, T) and the charge
batteries, but	contacts with a dry cloth and charge again.

–3still flashes or L It is time to replace the batteries (page 10).

–the operating time seems to be shorter.

Making/answering calls, intercom

Problem	Cause/solution
w is flashing.	L The handset is too far from the base unit. Move
	closer.
	L The base unit’s AC adaptor is not properly
	connected. Reconnect AC adaptor to the base
	unit.
	L The handset is not registered to the base unit.
	Register it (page 29).
Noise is heard, sound cuts	L You are using the handset or base unit in an area
in and out.	with high electrical interference. Re-position the
	base unit and use the handset away from sources
	of interference.
	L Move closer to the base unit.
	L If you use a DSL/ADSL service, we recommend
	connecting a DSL/ADSL filter between the base
	unit and the telephone line jack. Contact your
	DSL/ADSL provider for details.
The handset does not ring.	L The ringer volume is turned off. Adjust the ringer
	volume (page 25).
	L Night mode is turned on. Turn it off (page 28).
I cannot make a call.	L The dialing mode may be set incorrectly. Change
	the setting (page 13).
	L The handset is too far from the base unit. Move
	closer and try again.
I cannot make long	L Make sure that you have long distance service.
distance calls.

42For assistance, please visit http://www.panasonic.com/help