Panasonic KX-TG9321T, KX-TG9322 Error messages, Display message Cause/solution

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	L The called unit is in use.
	L Other units are in use and the system is busy.
	Try again later.
	L Privacy mode is on for the call you tried to join
	(page 26).
	L The handset you are using is too far from the
	base unit. Move closer and try again.
	L The handset’s registration may have been
	canceled. Re-register the handset (page 29).
Call phone company for	L You have not stored the voice mail access
your access #	number. Store the number (page 33).
Check tel line 1	L The supplied telephone line cord has not been
Check tel line 2	connected yet or not connected properly.
	Check the connections (page 8).
	L If you use the unit as a single-line telephone
	only, erase the message as follows:
	To erase “Check tel line 1”, press
	{MENU}. i{#}{1}{8}{9}
	To erase “Check tel line 2”, press
	{MENU}. i{#}{1}{9}{0}
	When a power failure occurs, the message is
	displayed again. Erase again as above.
Failed	L Phonebook copy failed (page 21). Confirm the
	other unit (the receiver) is in standby mode
	and try again.
Incomplete	L Phonebook copy is incomplete. The
	receiver’s phonebook memory is full. Erase
	the unnecessary phonebook entries (page 20)
	from the other unit (the receiver) and try
	again.
Memory full	L The phonebook memory is full. Erase
	unnecessary entries (page 20).

For assistance, please visit http://www.panasonic.com/help 39