Caller ID Service
Note:
LThe handset can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited.
LThis feature will not be activated until edited numbers are called back.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Storing caller information into the phonebook
Items in the caller list can be stored into each handset’s phonebook.
1
2 Press {V} or {^} repeatedly to display the desired item.
LTo edit the number, press {Edit} repeatedly until the number is shown in the desired format (page 28, step 3).
3 Press {Save}.
LIf there is no name information for the caller, “Enter name” will be displayed.
1Enter the name if necessary (see page 22, step 3).
2Press {Next}, then press {Save}.
LTo continue storing other items, repeat from step 2.
4 Press {OFF} to exit.
Note:
LIf the caller information does not include a phone number, you cannot store it in the phonebook.
Erasing caller information
Erasing a selected item
1 Press {V} or {^} to enter the caller list.
2 Press {V} or {^} repeatedly to display the desired item.
3 Press {CLEAR}.
LTo erase other items, repeat from step 2.
LTo exit the caller list, press {OFF}.
Erasing all items
Make sure that you have no missed calls. 1 Press {V} or {^} to enter the caller list.
2 Press {All erase}.
LTo cancel erasing, press {No}.
3 Press {Yes}.
For assistance, please call | 29 |