Panasonic KX-TG1611BX Important safety instructions, For best performance, Battery, Environment

Page 5

TG161xBX(e).book Page 5 Wednesday, October 19, 2011 8:45 AM

Important Information

LThis product is unable to make calls when:

the handset batteries need recharging or have failed.

there is a power failure.

Battery

LWe recommend using the batteries noted on page 3. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

LDo not mix old and new batteries.

LDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.

LExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

LCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.

LOnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to communicate with each other.

LFor maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.

away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.

facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)

LCoverage and voice quality depends on the local environmental conditions.

LIf the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.

Environment

LKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.

LThe product should be kept free from excessive smoke, dust, high temperature, and vibration.

LThe product should not be exposed to direct sunlight.

LDo not place heavy objects on top of the product.

LWhen you leave the product unused for a long period of time, unplug the product from the power outlet.

5

Image 5
Contents Thank you for purchasing a Panasonic product Digital Cordless PhoneTable of Contents Supplied accessories Accessory informationAdditional/replacement accessories Model compositionFor your safety Battery Important safety instructionsFor best performance Base unit location/avoiding noiseRoutine care SpecificationsOther information Battery installation Setting upConnections Correct WrongDuring a power failure Battery chargingBattery level Icon Battery levelDisplay ControlsHandset Base unitInitial settings Turning the power on/offDialling mode Display languageAnswering calls Making callsUseful features during a call Adding entries Handset phonebookErasing entries Finding and calling from a Phonebook entry Chain dialTG161xBXe.book Page 14 Wednesday, October 19, 2011 845 AM Main menu Sub-menu Programmable settingsProgramming by scrolling through the display menus Setup Language English Contrast Special programming AlarmCaller ID features Using Caller ID serviceCaller list Viewing the caller list and calling backStoring caller information to the phonebook Erasing caller informationErase or Erase All s Save TEL No. sj/OKVoice mail service Handset locator IntercomTransferring calls, conference calls Making an intercom callCharacter entry modes Character entryCyrillic character table P Extended 1 character table pExtended 2 character table O Troubleshooting Error messagesGeneral use Memory FullMaking/answering calls, intercom Programmable settingsBattery recharge Liquid damage Caller IDDeregistering a handset Registering a handset to the base unitChanging the base unit PIN Personal Identification Number Register HS sj/OKBase unit Charger Wall mountingIndex TG161xBXe.book Page 30 Wednesday, October 19, 2011 845 AM TG161xBXe.book Page 31 Wednesday, October 19, 2011 845 AM For your future reference