Panasonic KX-TG9341, KX-TG9331, KX-TG9343, KX-TG9334, KX-TG9333, KX-TG9332 Connections, Charger

Page 12

TG93XX_OI.book Page 12 Thursday, December 27, 2007 3:38 PM

Preparation

Connections

Connect the AC adaptor cord (A) by pressing the plug firmly (B). Connect the telephone line cord until it clicks into the base unit and telephone line jack (C).

Base unit

L Use only the supplied Panasonic AC adaptor PQLV207.

L Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit to work properly.

Charger

Available for:

KX-TG9332/KX-TG9333/

KX-TG9334/KX-TG9342/

KX-TG9343/KX-TG9344

L Use only the supplied Panasonic AC adaptor PQLV209.

 

B

A

Hooks

 

(120 V AC, 60 Hz)

To single-line telephone jack (RJ11C)

(120 V AC,

60 Hz)

C

A

B

Hook

Note:

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 6). Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 6.

12For assistance, please visit http://www.panasonic.com/help

Image 12
Contents Operating Instructions Caller ID Service Voice Mail ServiceIntroduction PreparationProduct information Notable differences between the modelsKX-TG9331 series Model No Base unit HandsetFeature highlights Accessory information Supplied accessoriesKX-TG Additional/replacement accessories Expanding your phone systemSales and support information KX-TGA630For your safety Important safety instructions BatteryFor best performance Base unit location/avoiding noiseEnvironment Routine careControls Base unitDisplay HandsetConnections ChargerBattery installation and replacement If you subscribe to a DSL/ADSL serviceBattery charge Battery level Battery iconOperation Operating time Symbols used in these operating instructions Setting up the unit before useDialing mode Display languageBelt clip Headset optionalDate and time To attach the belt clip To remove the belt clipUsing the handset Using the base unitMaking calls SP-PHONEAdjusting the base unit ringer volume Answering callsUseful features during a call HoldMute FlashTemporary tone dialing for rotary/pulse service users Handset clarity boosterCall share Call WaitShared phonebook Adding entriesFinding and calling a phonebook entry Editing entries Erasing entriesChain dial NextProgrammable settings Programming by scrolling through the display menusMenu Main menu Sub-menuInitial setting Programming using the direct commands Feature Setting code System CodeRing count TG93XXOI.book Page 27 Thursday, December 27, 2007 338 PM Special instructions for programmable settings Night modeBlock calls Caller ID subscribers only Alarm Setting the start and end timeTurning night mode on/off Registering a unit Customer supportOperating additional handsets Registering a handset to a base unitUsing Caller ID service Caller ID featuresTalking Caller ID Missed callsCaller ID number auto edit feature Caller listRinger ID Viewing the caller list and calling backErasing selected caller information Erasing all caller informationStoring caller information into the phonebook View CID All erase iYesTurning off the call screening feature Answering systemTurning the answering system on/off Memory capacityListening to messages using the base unit Greeting messageListening to messages using the handset Erasing all messagesVoice guidance Calling back Caller ID subscribers onlyRemote access code Using the answering system remotelyVoice memo Remote operationAnswering system settings Remote commandsTurning on the answering system remotely Skipping the greeting message to leave a messageCaller’s recording time Message alertVoice mail service Storing the voice mail VM access numberTo erase the voice mail access number Turning VM tone detection on/off The default setting is OnListening to voice mail messages New Voice Mail is displayed on the handsetIntercom Transferring calls, conference callsMaking an intercom call Answering an intercom callHandset locator Wall mounting To remove the wall mounting adaptor Error messages Display message Cause/solutionTroubleshooting General use Problem Cause/solutionProgrammable settings Problem Cause/solution Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Caller ID/Talking Caller ID Problem Cause/solution Answering system Problem Cause/solution Liquid damage Problem Cause/solution FCC and other information TG93XXOI.book Page 53 Thursday, December 27, 2007 338 PM FCC RF Exposure Warning Energy StarSpecifications Customer services Or, contact us via the web atTTY users hearing or speech impaired users can call Warranty Panasonic CorporationNorth America Limited Warranty Limits And Exclusions Index When you ship the product For your future referencePanasonic Puerto Rico, Inc Copyright
Related manuals
Manual 60 pages 18.51 Kb

KX-TG9334, KX-TG9342, KX-TG9341, KX-TG9333, KX-TG9343 specifications

Panasonic has long been a reputable name in the telecommunications industry, and its KX-TG series of cordless phones is no exception to this legacy. Notably, models like the KX-TG9332, KX-TG9331, KX-TG9343, KX-TG9333, and KX-TG9341 combine cutting-edge features with user-friendly technology, making them ideal choices for both home and office use.

First and foremost, these models showcase a sleek and modern design that fits seamlessly into any environment while providing superior functionalities. One of the standout features is the DECT 6.0 Plus technology, which enhances the clarity of sound and extends the range of the phones. This technology effectively minimizes interference, allowing users to enjoy uninterrupted conversations.

Another significant feature is the impressive battery life, with the phones offering up to 13 hours of talk time and up to 12 days of standby time. This ensures that users can remain connected without the frequent need for recharging. The KX-TG series also boasts a large, easy-to-read LCD display that simplifies navigation and usage.

The models come equipped with a digital answering machine, enabling users to manage missed calls effortlessly. This feature includes remote access capabilities, allowing users to retrieve messages away from home. Furthermore, the KX-TG9332, KX-TG9343, and other variants include a ‘Call Block’ feature, which can store unwanted numbers, preventing pesky telemarketer calls.

For families or larger households, the multi-handset functions are particularly advantageous. The KX-TG9332 and KX-TG9341, for instance, can support multiple handsets, helping users to stay connected throughout the home. Pairing these handsets is easy, further enhancing convenience.

Additionally, these models come with advanced features like intercom functionality, speakerphones, and customizable ringtones, improving user experience. They also support caller ID, making it easy to identify incoming calls and manage responses effectively.

In conclusion, the Panasonic KX-TG9332, KX-TG9331, KX-TG9343, KX-TG9333, and KX-TG9341 stand out as robust choices in the market of cordless telephones. They combine technological innovation with ease of use, making them perfect for anyone seeking reliability and functionality in their home communication system. Whether for personal use or as part of a business, these phones deliver on performance and style.