SMS Feature (Text Message)
Entering a Number from the Caller ID List
Follow steps 1 to 5 on the previous page, then:
6 Select the desired item.
twice
Go to step 7.
Entering a Number from the Redial List
Follow steps 1 to 5 on the previous page, then:
6 | Press RIGHT SOFT | Select the desired item. |
| KEY. |
|
twice
Go to step 7.
Follow steps 1 to 6 on the previous page and above, then:
7 | “Save?” is displayed, then select | 8 | Select “Send”. |
“Yes” or “No”. (If “Yes” is selected, |
|
“Saved Message” is displayed.)
Cordless Telephone
•“Sending Message” is displayed after step 8. The display returns to the standby mode, then “Transferring Message” is displayed.
•If the base unit does not have sufficient memory to send a message, the display will show “SMS lists are memory full. Delete messages.”. The unit will then return to the function menu.
•Once you have created a SMS message, the unit will display “WUse Last Text?” each time you select “Create”. If you want to use the text of the last message sent once again, move the JOYSTICK up to recall the last message.
•If you try to send a message using a phone number (Destination) over 20 digits long from one of the Phonebook, Caller ID or Redial lists, “Invalid Number” is displayed and the display returns to “<Enter Phone No>”.
•The maximum message length is 160 characters. Please consult your SMS service provider for further details.
•69 messages can be memorized when you enter 80 characters/1 message.
•If your phone is connected to PBX (Private Branch eXchange: private branch exchange), see page 42 to enter the destination number.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 | 33 |